Hi Ley Foon, On 3 June 2018 at 23:19, Ley Foon Tan <ley.foon....@intel.com> wrote: > Add reset ctrl to dwmmc socfpga, designware Ethernet and ns16550 serial > drivers. > > A reset property is an optional feature, so only print out a warning and > do not fail if a reset property is not present. > > If a reset property is discovered, then use it to deassert, thus bringing the > IP out of reset. > > v5 change: > - Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET > - Change to use CONFIG_IS_ENABLED(DM_RESET) in reset.h > - Added Simon's Reviewed-by in dwmmc, 16550 serial and designware emac > patches.
I think it is better to also include the earlier change logs, Also you should have a change log on each patch as well as the cover letter. The patman tool does this for you, so I suggest you take a look at that. > > History: > v1: https://patchwork.ozlabs.org/cover/905519/ > v2: https://patchwork.ozlabs.org/cover/908667/ > v3: https://patchwork.ozlabs.org/cover/910018/ > v4: https://patchwork.ozlabs.org/cover/923883/ > > Ley Foon Tan (5): > reset: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET > include: reset: Change to use CONFIG_IS_ENABLED(DM_RESET) > mmc: dwmmc: socfpga: Add reset ctrl to driver > serial: ns16550: Add reset ctrl to driver > net: designware: Add reset ctrl to driver > > arch/arm/mach-stm32mp/Kconfig | 2 +- > common/spl/Kconfig | 2 +- > drivers/Makefile | 2 +- > drivers/mmc/socfpga_dw_mmc.c | 17 +++++++++++++++++ > drivers/net/designware.c | 8 ++++++++ > drivers/serial/ns16550.c | 8 ++++++++ > include/reset.h | 2 +- > 7 files changed, 37 insertions(+), 4 deletions(-) > > -- > 2.2.2 > Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot