The DP83867 has a muxing option for the CLK_OUT pin. It is possible to set CLK_OUT for different channels. Create a binding to select a specific clock for CLK_OUT pin.
Based on commit '9708fb630d19ee51ae3aeb3a533e3010da0e8570' mainline linux kernel. Signed-off-by: Janine Hagemann <[email protected]> --- drivers/net/phy/ti.c | 24 ++++++++++++++++++++++++ include/dt-bindings/net/ti-dp83867.h | 15 +++++++++++++++ 2 files changed, 39 insertions(+) diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c index cc04789..9044b0f 100644 --- a/drivers/net/phy/ti.c +++ b/drivers/net/phy/ti.c @@ -96,6 +96,8 @@ DECLARE_GLOBAL_DATA_PTR; #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f +#define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8) +#define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8 /* CFG4 bits */ #define DP83867_CFG4_PORT_MIRROR_EN BIT(0) @@ -113,6 +115,7 @@ struct dp83867_private { int io_impedance; int port_mirroring; bool rxctrl_strap_quirk; + int clk_output_sel; }; /** @@ -213,6 +216,16 @@ static int dp83867_of_init(struct phy_device *phydev) struct udevice *dev = phydev->dev; int node = dev_of_offset(dev); const void *fdt = gd->fdt_blob; + u16 val; + + /* Optional configuration */ + + /* Keep the default value if ti,clk-output-sel is not set + * or to high + */ + + dp83867->clk_output_sel = fdtdec_get_uint(fdt, node, + "ti,clk-output-sel", DP83867_CLK_O_SEL_REF_CLK); if (fdtdec_get_bool(fdt, node, "ti,max-output-impedance")) dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX; @@ -239,6 +252,17 @@ static int dp83867_of_init(struct phy_device *phydev) dp83867->fifo_depth = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "ti,fifo-depth", -1); + /* Clock output selection if muxing property is set */ + if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) { + val = phy_read_mmd_indirect(phydev, DP83867_IO_MUX_CFG, + DP83867_DEVADDR, phydev->addr); + val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK; + val |= (dp83867->clk_output_sel << + DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT); + phy_write_mmd_indirect(phydev, DP83867_IO_MUX_CFG, + DP83867_DEVADDR, phydev->addr, val); + } + return 0; } #else diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h index b8e5df6..85d08f6 100644 --- a/include/dt-bindings/net/ti-dp83867.h +++ b/include/dt-bindings/net/ti-dp83867.h @@ -31,4 +31,19 @@ #define DP83867_RGMIIDCTL_3_75_NS 0xe #define DP83867_RGMIIDCTL_4_00_NS 0xf +/* IO_MUX_CFG - Clock output selection */ +#define DP83867_CLK_O_SEL_CHN_A_RCLK 0x0 +#define DP83867_CLK_O_SEL_CHN_B_RCLK 0x1 +#define DP83867_CLK_O_SEL_CHN_C_RCLK 0x2 +#define DP83867_CLK_O_SEL_CHN_D_RCLK 0x3 +#define DP83867_CLK_O_SEL_CHN_A_RCLK_DIV5 0x4 +#define DP83867_CLK_O_SEL_CHN_B_RCLK_DIV5 0x5 +#define DP83867_CLK_O_SEL_CHN_C_RCLK_DIV5 0x6 +#define DP83867_CLK_O_SEL_CHN_D_RCLK_DIV5 0x7 +#define DP83867_CLK_O_SEL_CHN_A_TCLK 0x8 +#define DP83867_CLK_O_SEL_CHN_B_TCLK 0x9 +#define DP83867_CLK_O_SEL_CHN_C_TCLK 0xA +#define DP83867_CLK_O_SEL_CHN_D_TCLK 0xB +#define DP83867_CLK_O_SEL_REF_CLK 0xC + #endif -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
