On Thu, Jun 14, 2018 at 4:48 AM, Janine Hagemann <j.hagem...@phytec.de> wrote: > The DP83867 when not properly bootstrapped - especially with LED_0 pin - > can enter N/A MODE4 for "port mirroring" feature. > > To provide normal operation of the PHY, one needs not only to explicitly > disable the port mirroring feature, but as well stop some IC internal > testing (which disables RGMII communication). > > To do that the STRAP_STS1 (0x006E) register must be read and RESERVED bit > 11 examined. When it is set, the another RESERVED bit (11) at PHYCR > (0x0010) register must be clear to disable testing mode and enable RGMII > communication. > > Thorough explanation of the problem can be found at following e2e thread: > "DP83867IR: Problem with RESERVED bits in PHY Control Register (PHYCR) - > Linux driver" > > https://e2e.ti.com/support/interface/ethernet/f/903/p/571313/2096954#2096954 > > Based on commit 'ac6e058b75be71208e98a5808453aae9a17be480' of mainline linux > kernel.
Same comment about commit reference format. > > Signed-off-by: Janine Hagemann <j.hagem...@phytec.de> Otherwise, Acked-by: Joe Hershberger <joe.hershber...@ni.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot