Am 22.04.2019 um 20:01 schrieb Marek Vasut:
On 4/19/19 10:00 PM, Simon Goldschmidt wrote:
On 17.04.19 22:15, Marek Vasut wrote:
Add optional "mask" argument to the SoCFPGA bridge command, to select
which bridges should be enabled/disabled. This allows the user to avoid
enabling bridges which are not connected into the FPGA fabric. Default
behavior is to enable/disable all bridges.
So does this change the command? Seems like leaving away the new 'mask'
argument would now lead to enabling all bridges by overwriting whatever
the handoff values were before?
That's how it behaved before though -- all the bridges were enabled.
Now it's possible to explicitly select which bridges to enable/disable.
As I read the code, before it wrote iswgrp_handoff[x] to the registers.
The question is what is iswgrp_handoff[x]. It's not the bridges status
from Quartus (as the "handoff" suffix might suggest). Instead (if I
remember correctly), it's either "all bridges" or "no bridges",
depending on the FPGA configuration status at SPL runtime.
In this case, we're probably better off with leaving it to the command
line scripts to say which bridges shall be enabled...
Reviewed-by: Simon Goldschmidt <[email protected]>
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
