> Add i.MX8QM MEK board support. > Included a basic dts, enabled SPL FIT > Boot log as below: > U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) > Normal Boot > Trying to boot from MMC2_2 > U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) > CPU: NXP i.MX8QM RevB A53 at 142933 MHz > Model: Freescale i.MX8QM MEK > Board: iMX8QM MEK > Build: SCFW 9330215b > Boot: SD1 > DRAM: 6 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > Loading Environment from MMC... *** Warning - bad CRC, using default > environment > In: serial@5a060000 > Out: serial@5a060000 > Err: serial@5a060000 > Net: > Error: ethernet@5b040000 address not set. > eth-1: ethernet@5b040000 > Hit any key to stop autoboot: 0 > Signed-off-by: Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
