On Thu, Jul 18, 2019 at 4:33 PM Vladimir Oltean <[email protected]> wrote: > > This patchset adds initial support for the NXP LS1021A-TSN board, > an evaluation platform built in partnership with VVDN/Argonboards > for some IEEE 802.1 TSN features. > > It features a cleaned-up U-Boot board support taken from OpenIL, > as well as an eTSEC migration to DM_ETH. I picked up Bin Meng's > patch that converts the LS1021A-TWR (different board, same SoC): > https://lists.denx.de/pipermail/u-boot/2018-May/330096.html > verified it on the LS1021A-TSN board I am submitting, and made a > few adjustments where necessary. > > TODO items: > - Make the eTSEC driver support fixed-link interfaces (necessary > for the enet2 <-> sja1105 internal port) > - Add driver for SJA1105 switch > - Potentially migrate the eTSEC MDIO bus driver to DM_MDIO and > expose the TBI PHY to mdio commands (useful for debugging), > once https://lists.denx.de/pipermail/u-boot/2019-June/371563.html > is merged.
This series is merged at this point... are you wanting to do that migration now or do it sometime later? > > Bin Meng (1): > arm: ls1021atwr: Convert to use driver model TSEC driver > > Jianchao Wang (1): > Add support for the NXP LS1021A-TSN board > > Vladimir Oltean (7): > net: tsec: Refactor the readout of the tbi-handle property > net: tsec: Fix offset of MDIO registers for DM_ETH > net: tsec: Reverse Christmas tree notation > net: tsec: Make errors visible > net: tsec: Common handling of MAC station address for DM_ETH > net: tsec: Change compatible strings to match Linux > configs: ls1021atwr: Fix distro_bootcmd for QSPI boot > > arch/arm/Kconfig | 14 + > arch/arm/cpu/armv7/ls102xa/cpu.c | 2 +- > arch/arm/cpu/armv7/ls102xa/fdt.c | 10 + > arch/arm/dts/Makefile | 2 +- > arch/arm/dts/ls1021a-tsn.dts | 77 ++++++ > arch/arm/dts/ls1021a-twr.dtsi | 32 +++ > arch/arm/dts/ls1021a.dtsi | 30 +- > board/freescale/ls1021atsn/Kconfig | 18 ++ > board/freescale/ls1021atsn/MAINTAINERS | 8 + > board/freescale/ls1021atsn/Makefile | 3 + > board/freescale/ls1021atsn/README.rst | 97 +++++++ > board/freescale/ls1021atsn/ls1021atsn.c | 260 ++++++++++++++++++ > board/freescale/ls1021atsn/ls102xa_pbi.cfg | 15 + > board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg | 8 + > board/freescale/ls1021atwr/ls1021atwr.c | 38 --- > configs/ls1021atsn_qspi_defconfig | 79 ++++++ > configs/ls1021atsn_sdcard_defconfig | 91 ++++++ > configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 2 + > configs/ls1021atwr_nor_defconfig | 2 + > configs/ls1021atwr_nor_lpuart_defconfig | 2 + > configs/ls1021atwr_qspi_defconfig | 2 + > ...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 2 + > configs/ls1021atwr_sdcard_ifc_defconfig | 2 + > configs/ls1021atwr_sdcard_qspi_defconfig | 2 + > doc/device-tree-bindings/net/fsl-tsec-phy.txt | 4 +- > drivers/net/tsec.c | 59 ++-- > include/configs/ls1021atsn.h | 250 +++++++++++++++++ > include/configs/ls1021atwr.h | 30 +- > include/tsec.h | 4 +- > 29 files changed, 1038 insertions(+), 107 deletions(-) > create mode 100644 arch/arm/dts/ls1021a-tsn.dts > create mode 100644 board/freescale/ls1021atsn/Kconfig > create mode 100644 board/freescale/ls1021atsn/MAINTAINERS > create mode 100644 board/freescale/ls1021atsn/Makefile > create mode 100644 board/freescale/ls1021atsn/README.rst > create mode 100644 board/freescale/ls1021atsn/ls1021atsn.c > create mode 100644 board/freescale/ls1021atsn/ls102xa_pbi.cfg > create mode 100644 board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg > create mode 100644 configs/ls1021atsn_qspi_defconfig > create mode 100644 configs/ls1021atsn_sdcard_defconfig > create mode 100644 include/configs/ls1021atsn.h > > -- > 2.17.1 > > _______________________________________________ > U-Boot mailing list > [email protected] > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
