On Wed, Jul 24, 2019 at 10:38 AM Vladimir Oltean <olte...@gmail.com> wrote: > > On Tue, 23 Jul 2019 at 10:38, Joe Hershberger <joe.hershber...@ni.com> wrote: > > > > On Tue, Jul 23, 2019 at 1:08 AM Vladimir Oltean <olte...@gmail.com> wrote: > > > > > > Hi Joe, > > > > > > On Tue, 23 Jul 2019 at 03:15, Joe Hershberger <joe.hershber...@ni.com> > > > wrote: > > > > > > > > On Thu, Jul 18, 2019 at 4:33 PM Vladimir Oltean <olte...@gmail.com> > > > > wrote: > > > > > > > > > > This patchset adds initial support for the NXP LS1021A-TSN board, > > > > > an evaluation platform built in partnership with VVDN/Argonboards > > > > > for some IEEE 802.1 TSN features. > > > > > > > > > > It features a cleaned-up U-Boot board support taken from OpenIL, > > > > > as well as an eTSEC migration to DM_ETH. I picked up Bin Meng's > > > > > patch that converts the LS1021A-TWR (different board, same SoC): > > > > > https://lists.denx.de/pipermail/u-boot/2018-May/330096.html > > > > > verified it on the LS1021A-TSN board I am submitting, and made a > > > > > few adjustments where necessary. > > > > > > > > > > TODO items: > > > > > - Make the eTSEC driver support fixed-link interfaces (necessary > > > > > for the enet2 <-> sja1105 internal port) > > > > > - Add driver for SJA1105 switch > > > > > - Potentially migrate the eTSEC MDIO bus driver to DM_MDIO and > > > > > expose the TBI PHY to mdio commands (useful for debugging), > > > > > once https://lists.denx.de/pipermail/u-boot/2019-June/371563.html > > > > > is merged. > > > > > > > > This series is merged at this point... are you wanting to do that > > > > migration now or do it sometime later? > > > > > > > > > > I think I would rather have these 9 patches merged first, now that > > > they got reviewed, instead of reworking them again. > > > > Sounds good. > > Thanks, > > -Joe > > > > What does this mean, that we are waiting for Prabhakar's OK? Is the > patchset going to get in through a single tree? Whose is it going to > be?
Since the vast majority of the series is the Ethernet changes, I was planning to take it. Thanks, -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot