On Wed, Sep 18, 2019 at 12:23 PM Simon Goldschmidt <[email protected]> wrote: > > > > Ley Foon Tan <[email protected]> schrieb am Mi., 18. Sep. 2019, 04:32: >> >> On Wed, Sep 18, 2019 at 6:33 AM Dinh Nguyen <[email protected]> wrote: >> > >> > >> > >> > On 9/10/19 3:37 AM, Ley Foon Tan wrote: >> > > This is 2nd version of patchset to convert reset, system and clock >> > > manager >> > > drivers to use #define instead of struct. >> > > >> > > Tested on Cyclone 5, Arria 10 and Stratix 10 devices. >> > > >> > > Patch 1 is new one, patch 2 to 4 have changes. >> > > >> > > Main changes in this version are: >> > > - Get base address from DT >> > > - Change to use writel(), readl(), setbits_le32() and clrbits_le32(). >> > > - Add prefix to defines. >> > > - Add "u-boot,dm-pre-reloc" to clock and system manager nodes. >> > > >> > > History: >> > > v1: https://patchwork.ozlabs.org/cover/1149731/ >> > > >> > >> > I think you also need to Simon Goldschmidt to this series. >> Simon is in the CC list in my original email. > > > And I'm trying my best to catch up with u-boot mails and patches. I already > read it through but failed to find the time to review and test it. Next week, > hopefully... > > Regards, > Simon > >> > >> > Beside the minor incorrect address missing a zero in patch 1, I've >> > tested this series on the Sockit. >> > >> > Tested-by: Dinh Nguyen <[email protected]>
Hi Marek and Simon Any further comment for this series? Otherwise, I will send v3 with minor change for Dinh's comment. Thanks. Regards Ley Foon _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
