Am 02.10.2019 um 11:23 schrieb Simon Goldschmidt:
On Wed, Oct 2, 2019 at 10:13 AM Ley Foon Tan <[email protected]> wrote:
On Wed, Sep 18, 2019 at 12:23 PM Simon Goldschmidt
<[email protected]> wrote:
Ley Foon Tan <[email protected]> schrieb am Mi., 18. Sep. 2019, 04:32:
On Wed, Sep 18, 2019 at 6:33 AM Dinh Nguyen <[email protected]> wrote:
On 9/10/19 3:37 AM, Ley Foon Tan wrote:
This is 2nd version of patchset to convert reset, system and clock manager
drivers to use #define instead of struct.
Tested on Cyclone 5, Arria 10 and Stratix 10 devices.
Patch 1 is new one, patch 2 to 4 have changes.
Main changes in this version are:
- Get base address from DT
- Change to use writel(), readl(), setbits_le32() and clrbits_le32().
- Add prefix to defines.
- Add "u-boot,dm-pre-reloc" to clock and system manager nodes.
History:
v1: https://patchwork.ozlabs.org/cover/1149731/
I think you also need to Simon Goldschmidt to this series.
Simon is in the CC list in my original email.
And I'm trying my best to catch up with u-boot mails and patches. I already
read it through but failed to find the time to review and test it. Next week,
hopefully...
Regards,
Simon
Beside the minor incorrect address missing a zero in patch 1, I've
tested this series on the Sockit.
Tested-by: Dinh Nguyen <[email protected]>
Hi Marek and Simon
Any further comment for this series? Otherwise, I will send v3 with
minor change for Dinh's comment.
I did my best to catch up now. Ping back if there are still patches missing/
uncommented, please.
So could we have v3 with those minor changes (and adjusted commit
messages)? I'd like to base my series on these changes to prevent merge
conflicts.
Thanks,
Simon
Regards,
Simon
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
