Dear ALL, > Hah... with this patch it works: > > diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S > index 5a7ae7e..cf3a59f 100644 > --- a/arch/arm/cpu/arm926ejs/start.S > +++ b/arch/arm/cpu/arm926ejs/start.S > @@ -266,7 +266,7 @@ fixnext: > str r1, [r0] > add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ > cmp r2, r3 > - ble fixloop > + bne fixloop
Indeed, with this single change (not using NAND options here) it works, too, and data gets properly relocated, since "sf probe" works, too (it does not do so with Heiko's relocation) Hurray!!!! U-Boot 2010.09-00114-g4ab53c3-dirty (Oct 05 2010 - 12:25:06) U-Boot code: 21F00000 -> 21F3EBA0 BSS: -> 21F80100 CPU: AT91SAM9XE Crystal frequency: 18.432 MHz CPU clock : 198.656 MHz Master clock : 99.328 MHz I2C: ready monitor len: 00080100 ramsize: 04000000 Top of RAM usable for U-Boot at: 24000000 Reserving 512k for U-Boot at: 23f7f000 Reserving 143k for malloc() at: 23f5b100 Reserving 24 Bytes for Board Info at: 23f5b0e8 Reserving 136 Bytes for Global Data at: 23f5b060 New Stack Pointer is: 23f5b058 RAM Configuration: Bank #0: 20000000 64 MiB relocation Offset is: 0207f000 calling relocate_code(addr_sp=23f5b058, id=23f5b060, addr=23f7f000) monitor flash len: 0003EBA0 Now running in RAM - U-Boot at: 23f7f000 FLASH: 512 KiB NAND: 256 MiB In: serial Out: serial Err: serial MMC: mci: 0 Net: macb0, enc1.0, enc1.1, enc1.2 Reset Ethernet PHY macb0: Starting autonegotiation... macb0: Autonegotiation complete macb0: link up, 100Mbps full-duplex (lpa: 0x45e1) Press SPACE to abort autoboot in 1 seconds TOP9000> sf probe 0:0 SF: Detected FM25H20 with size 256 KiB 256 KiB FM25H20 at 0:0 is now current device Many thanks!!!! Reinhard _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
