Add CONFIG_CMD_STM32PROG_SERIAL and CONFIG_CMD_STM32PROG_USB to independently select the support of UART or USB communication for STM32CubeProgrammer.
For serial boot over UART, user can deactivate CONFIG_CMD_STM32PROG_SERIAL to use U-Boot console of binary loaded by UART (for board bring-up for example). Signed-off-by: Patrick Delaunay <[email protected]> --- arch/arm/mach-stm32mp/Makefile | 2 +- arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig | 20 ++++++++++++++-- arch/arm/mach-stm32mp/cmd_stm32prog/Makefile | 8 +++---- .../cmd_stm32prog/cmd_stm32prog.c | 4 ++-- .../mach-stm32mp/cmd_stm32prog/stm32prog.h | 23 ++++++++++++++++++- arch/arm/mach-stm32mp/cpu.c | 5 ++-- board/st/common/stm32mp_dfu.c | 9 ++++---- 7 files changed, 55 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile index c8aa24d489..aa39867080 100644 --- a/arch/arm/mach-stm32mp/Makefile +++ b/arch/arm/mach-stm32mp/Makefile @@ -11,7 +11,7 @@ obj-y += bsec.o ifdef CONFIG_SPL_BUILD obj-y += spl.o else -obj-$(CONFIG_CMD_STM32PROG) += cmd_stm32prog/ +obj-y += cmd_stm32prog/ obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o obj-$(CONFIG_ARMV7_PSCI) += psci.o obj-$(CONFIG_TFABOOT) += boot_params.o diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig index 609a678793..f4c0d18d4d 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig @@ -11,8 +11,24 @@ config CMD_STM32PROG imply DFU_MTD if MTD help activate a specific command stm32prog for STM32MP soc family - witch update the device with the tools STM32CubeProgrammer, - using UART with STM32 protocol or USB with DFU protocol + witch update the device with the tools STM32CubeProgrammer NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based on U-Boot DFU framework +config CMD_STM32PROG_USB + bool "support stm32prog over USB" + depends on CMD_STM32PROG + default y + help + activate the command "stm32prog usb" for STM32MP soc family + witch update the device with the tools STM32CubeProgrammer, + using USB with DFU protocol + +config CMD_STM32PROG_SERIAL + bool "support stm32prog over UART" + depends on CMD_STM32PROG + default y + help + activate the command "stm32prog serial" for STM32MP soc family + with the tools STM32CubeProgrammer using U-Boot serial device + and UART protocol. \ No newline at end of file diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile b/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile index 548a378921..b57e1bf870 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2020, STMicroelectronics - All Rights Reserved # -obj-y += cmd_stm32prog.o -obj-y += stm32prog.o -obj-y += stm32prog_serial.o -obj-y += stm32prog_usb.o +obj-$(CONFIG_CMD_STM32PROG) += cmd_stm32prog.o +obj-$(CONFIG_CMD_STM32PROG) += stm32prog.o +obj-$(CONFIG_CMD_STM32PROG_SERIAL) += stm32prog_serial.o +obj-$(CONFIG_CMD_STM32PROG_USB) += stm32prog_usb.o diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c index 34a6be66c3..a7e2861764 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c @@ -50,9 +50,9 @@ static int do_stm32prog(struct cmd_tbl *cmdtp, int flag, int argc, if (argc < 3 || argc > 5) return CMD_RET_USAGE; - if (!strcmp(argv[1], "usb")) + if (IS_ENABLED(CONFIG_CMD_STM32PROG_USB) && !strcmp(argv[1], "usb")) link = LINK_USB; - else if (!strcmp(argv[1], "serial")) + else if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) && !strcmp(argv[1], "serial")) link = LINK_SERIAL; if (link == LINK_UNDEFINED) { diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h index be482c3402..18af99c78b 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h @@ -177,9 +177,30 @@ char *stm32prog_get_error(struct stm32prog_data *data); /* Main function */ int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size); +void stm32prog_clean(struct stm32prog_data *data); + +#ifdef CONFIG_CMD_STM32PROG_SERIAL int stm32prog_serial_init(struct stm32prog_data *data, int link_dev); bool stm32prog_serial_loop(struct stm32prog_data *data); +#else +static inline int stm32prog_serial_init(struct stm32prog_data *data, int link_dev) +{ + return -ENOSYS; +} + +static inline bool stm32prog_serial_loop(struct stm32prog_data *data) +{ + return false; +} +#endif + +#ifdef CONFIG_CMD_STM32PROG_USB bool stm32prog_usb_loop(struct stm32prog_data *data, int dev); -void stm32prog_clean(struct stm32prog_data *data); +#else +static inline bool stm32prog_usb_loop(struct stm32prog_data *data, int dev) +{ + return false; +} +#endif #endif diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c index 3faa4ec18a..a453f89d02 100644 --- a/arch/arm/mach-stm32mp/cpu.c +++ b/arch/arm/mach-stm32mp/cpu.c @@ -265,7 +265,8 @@ int arch_cpu_init(void) boot_mode = get_bootmode(); - if ((boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART) + if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) && + (boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART) gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE; #if defined(CONFIG_DEBUG_UART) && \ !defined(CONFIG_TFABOOT) && \ @@ -485,7 +486,7 @@ static void setup_boot_mode(void) env_set("boot_instance", cmd); /* restore console on uart when not used */ - if (gd->cur_serial_dev != dev) { + if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) && gd->cur_serial_dev != dev) { gd->flags &= ~(GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE); printf("serial boot with console enabled!\n"); diff --git a/board/st/common/stm32mp_dfu.c b/board/st/common/stm32mp_dfu.c index 5633a6cb95..00d1fb8f59 100644 --- a/board/st/common/stm32mp_dfu.c +++ b/board/st/common/stm32mp_dfu.c @@ -143,7 +143,8 @@ void set_dfu_alt_info(char *interface, char *devstr) board_get_alt_info_mtd(mtd, buf); } - if (IS_ENABLED(CONFIG_DFU_VIRT)) { + if (IS_ENABLED(CONFIG_DFU_VIRT) && + IS_ENABLED(CMD_STM32PROG_USB)) { strncat(buf, "&virt 0=OTP", DFU_ALT_BUF_LEN); if (IS_ENABLED(CONFIG_PMIC_STPMIC1)) @@ -217,7 +218,7 @@ int dfu_read_medium_virt(struct dfu_entity *dfu, u64 offset, return dfu_pmic_read(offset, buf, len); } - if (CONFIG_IS_ENABLED(CMD_STM32PROG) && + if (IS_ENABLED(CONFIG_CMD_STM32PROG_USB) && dfu->data.virt.dev_num >= STM32PROG_VIRT_FIRST_DEV_NUM) return stm32prog_read_medium_virt(dfu, offset, buf, len); @@ -228,7 +229,7 @@ int dfu_read_medium_virt(struct dfu_entity *dfu, u64 offset, int dfu_write_medium_virt(struct dfu_entity *dfu, u64 offset, void *buf, long *len) { - if (CONFIG_IS_ENABLED(CMD_STM32PROG) && + if (IS_ENABLED(CONFIG_CMD_STM32PROG_USB) && dfu->data.virt.dev_num >= STM32PROG_VIRT_FIRST_DEV_NUM) return stm32prog_write_medium_virt(dfu, offset, buf, len); @@ -237,7 +238,7 @@ int dfu_write_medium_virt(struct dfu_entity *dfu, u64 offset, int __weak dfu_get_medium_size_virt(struct dfu_entity *dfu, u64 *size) { - if (CONFIG_IS_ENABLED(CMD_STM32PROG) && + if (IS_ENABLED(CONFIG_CMD_STM32PROG_USB) && dfu->data.virt.dev_num >= STM32PROG_VIRT_FIRST_DEV_NUM) return stm32prog_get_medium_size_virt(dfu, size); -- 2.17.1
