Hi On 3/9/21 2:07 PM, Patrice CHOTARD wrote: > Hi Patrick > > On 2/25/21 1:37 PM, Patrick Delaunay wrote: >> Move CONFIG_CMD_STM32PROG in a specific Kconfig file for stm32prog command. >> >> Signed-off-by: Patrick Delaunay <[email protected]> >> --- >> >> arch/arm/mach-stm32mp/Kconfig | 18 +----------------- >> arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig | 18 ++++++++++++++++++ >> 2 files changed, 19 insertions(+), 17 deletions(-) >> create mode 100644 arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig >> >> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig >> index f538d7cb83..079d66a80c 100644 >> --- a/arch/arm/mach-stm32mp/Kconfig >> +++ b/arch/arm/mach-stm32mp/Kconfig >> @@ -121,23 +121,6 @@ config STM32_ETZPC >> help >> Say y to enable STM32 Extended TrustZone Protection >> >> -config CMD_STM32PROG >> - bool "command stm32prog for STM32CudeProgrammer" >> - select DFU >> - select DFU_RAM >> - select DFU_VIRT >> - select PARTITION_TYPE_GUID >> - imply CMD_GPT if MMC >> - imply CMD_MTD if MTD >> - imply DFU_MMC if MMC >> - imply DFU_MTD if MTD >> - help >> - activate a specific command stm32prog for STM32MP soc family >> - witch update the device with the tools STM32CubeProgrammer, >> - using UART with STM32 protocol or USB with DFU protocol >> - NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based >> - on U-Boot DFU framework >> - >> config CMD_STM32KEY >> bool "command stm32key to fuse public key hash" >> default y >> @@ -177,6 +160,7 @@ config DEBUG_UART_CLOCK >> default 64000000 >> endif >> >> +source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig" >> source "board/st/stm32mp1/Kconfig" >> source "board/dhelectronics/dh_stm32mp1/Kconfig" >> >> diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig >> b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig >> new file mode 100644 >> index 0000000000..609a678793 >> --- /dev/null >> +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig >> @@ -0,0 +1,18 @@ >> + >> +config CMD_STM32PROG >> + bool "command stm32prog for STM32CudeProgrammer" >> + select DFU >> + select DFU_RAM >> + select DFU_VIRT >> + select PARTITION_TYPE_GUID >> + imply CMD_GPT if MMC >> + imply CMD_MTD if MTD >> + imply DFU_MMC if MMC >> + imply DFU_MTD if MTD >> + help >> + activate a specific command stm32prog for STM32MP soc family >> + witch update the device with the tools STM32CubeProgrammer, >> + using UART with STM32 protocol or USB with DFU protocol >> + NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based >> + on U-Boot DFU framework >> + >> > > > Reviewed-by: Patrice Chotard <[email protected]> > > Thanks > Patrice > _______________________________________________ > Uboot-stm32 mailing list > [email protected] > https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32 > Applied to u-boot-stm/next
Thanks Patrice
