Hi Patrick On 2/25/21 1:37 PM, Patrick Delaunay wrote: > Move CONFIG_CMD_STM32PROG in a specific Kconfig file for stm32prog command. > > Signed-off-by: Patrick Delaunay <[email protected]> > --- > > arch/arm/mach-stm32mp/Kconfig | 18 +----------------- > arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig | 18 ++++++++++++++++++ > 2 files changed, 19 insertions(+), 17 deletions(-) > create mode 100644 arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig > > diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig > index f538d7cb83..079d66a80c 100644 > --- a/arch/arm/mach-stm32mp/Kconfig > +++ b/arch/arm/mach-stm32mp/Kconfig > @@ -121,23 +121,6 @@ config STM32_ETZPC > help > Say y to enable STM32 Extended TrustZone Protection > > -config CMD_STM32PROG > - bool "command stm32prog for STM32CudeProgrammer" > - select DFU > - select DFU_RAM > - select DFU_VIRT > - select PARTITION_TYPE_GUID > - imply CMD_GPT if MMC > - imply CMD_MTD if MTD > - imply DFU_MMC if MMC > - imply DFU_MTD if MTD > - help > - activate a specific command stm32prog for STM32MP soc family > - witch update the device with the tools STM32CubeProgrammer, > - using UART with STM32 protocol or USB with DFU protocol > - NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based > - on U-Boot DFU framework > - > config CMD_STM32KEY > bool "command stm32key to fuse public key hash" > default y > @@ -177,6 +160,7 @@ config DEBUG_UART_CLOCK > default 64000000 > endif > > +source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig" > source "board/st/stm32mp1/Kconfig" > source "board/dhelectronics/dh_stm32mp1/Kconfig" > > diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig > b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig > new file mode 100644 > index 0000000000..609a678793 > --- /dev/null > +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig > @@ -0,0 +1,18 @@ > + > +config CMD_STM32PROG > + bool "command stm32prog for STM32CudeProgrammer" > + select DFU > + select DFU_RAM > + select DFU_VIRT > + select PARTITION_TYPE_GUID > + imply CMD_GPT if MMC > + imply CMD_MTD if MTD > + imply DFU_MMC if MMC > + imply DFU_MTD if MTD > + help > + activate a specific command stm32prog for STM32MP soc family > + witch update the device with the tools STM32CubeProgrammer, > + using UART with STM32 protocol or USB with DFU protocol > + NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based > + on U-Boot DFU framework > + >
Reviewed-by: Patrice Chotard <[email protected]> Thanks Patrice
