Dear Albert ARIBAUD, In message <[email protected]> you wrote: > > Can you enable DEBUG globally and capture the u-boot output in a terminal?
Here it is: U-Boot 2010.12-rc1-00027-g03ab00d-dirty (Oct 31 2010 - 20:57:21) U-Boot code: 81200000 -> 81226E50 BSS: -> 81230758 CPU: Freescale i.MX25 at 399 MHz monitor len: 00030758 ramsize: 02000000 TLB table at: 81ff0000 Top of RAM usable for U-Boot at: 81ff0000 Reserving 193k for U-Boot at: 81fbf000 Reserving 1024k for malloc() at: 81ebf000 Reserving 24 Bytes for Board Info at: 81ebefe8 Reserving 92 Bytes for Global Data at: 81ebef8c New Stack Pointer is: 81ebef88 RAM Configuration: Bank #0: 80000000 32 MiB relocation Offset is: 00dbf000 Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Hacking's just another word for nothing left to kludge. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
