Le 31/10/2010 20:59, Wolfgang Denk a écrit : > Dear Albert ARIBAUD, > > In message<[email protected]> you wrote: >> >> Can you enable DEBUG globally and capture the u-boot output in a terminal? > > Here it is: > > U-Boot 2010.12-rc1-00027-g03ab00d-dirty (Oct 31 2010 - 20:57:21) > > U-Boot code: 81200000 -> 81226E50 BSS: -> 81230758
Weird... display_banner() is called before relocation and uses whatever the linker put in the literals; but these values above do not match those of the u-boot you sent me last. According to the .map, the *whole* of the tx25 image ends at 0x81230398, and BSS itself goes from 0x812235f4 to 0x8122c700. So *before* relocation there already is an issue. Can you double-check that the u-boot you sent me is the one you ran? > monitor len: 00030758 Should have been 0x2c700. > Best regards, > > Wolfgang Denk Amicalement, -- Albert. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
