On Mon, Oct 3, 2022 at 10:13 AM Fabio Estevam <[email protected]> wrote: > > Hi Tim, > > On Wed, Sep 28, 2022 at 4:37 PM Tim Harvey <[email protected]> wrote: > > > diff --git a/configs/gwventana_gw5904_defconfig > > b/configs/gwventana_gw5904_defconfig > > index 8c6baf0ae5e2..33b57c5a1c5d 100644 > > --- a/configs/gwventana_gw5904_defconfig > > +++ b/configs/gwventana_gw5904_defconfig > > @@ -111,11 +111,11 @@ CONFIG_SUPPORT_EMMC_BOOT=y > > CONFIG_FSL_USDHC=y > > CONFIG_MTD=y > > CONFIG_PHYLIB=y > > -CONFIG_MV88E61XX_SWITCH=y > > -CONFIG_MV88E61XX_CPU_PORT=5 > > -CONFIG_MV88E61XX_PHY_PORTS=0xf > > -CONFIG_MV88E61XX_FIXED_PORTS=0x0 > > +CONFIG_MV88E61XX=y > > There is a typo here: > > This one should be CONFIG_MV88E6XXX instead.
Ooops - thanks for pointing that out. I have another patch on top to merge two defconfigs that fixed that typo introduced with the v4 series that changed MV88E61XX to MV88E6XXX. > > After fixing this and passing CONFIG_NET_RANDOM_ETHADDR=y to my custom > board defconfig: > > ethernet 0 [ + ] fecmxc | | `-- ethernet@30be0000 > bootdev 2 [ ] eth_bootdev | | |-- > [email protected] > mdio 0 [ + ] fec_mdio | | `-- mdio > dsa 0 [ ] mv88e6xxx | | `-- switch@0 > ethernet 1 [ ] dsa-port | | |-- lan4 > bootdev 3 [ ] eth_bootdev | | | > `-- switch@[email protected] > ethernet 2 [ ] dsa-port | | |-- lan3 > bootdev 4 [ ] eth_bootdev | | | > `-- switch@[email protected] > ethernet 3 [ ] dsa-port | | |-- lan2 > bootdev 5 [ ] eth_bootdev | | | > `-- switch@[email protected] > ethernet 4 [ ] dsa-port | | |-- lan1 > bootdev 6 [ ] eth_bootdev | | | > `-- switch@[email protected] > mdio 1 [ + ] mv88e6xxx_mdio | | > |-- mv88e6xxx-mdio-0 > mdio 2 [ ] mv88e6xxx_mdio | | > |-- mv88e6xxx-mdio-1 > mdio 3 [ ] mv88e6xxx_mdio | | > |-- mv88e6xxx-mdio-2 > mdio 4 [ ] mv88e6xxx_mdio | | > `-- mv88e6xxx-mdio-3 > > but still not able to get a DHCP address: > > u-boot=> dhcp > BOOTP broadcast 1 > BOOTP broadcast 2 > BOOTP broadcast 3 > BOOTP broadcast 4 With CONFIG_CMD_NET=y what does 'net list' show? I have the following (with network attached to lan4 port) Net: MV88E61XX eth0: ethernet@2188000, eth1: lan4, eth2: lan3, eth3: lan2, eth 4: lan1 Hit any key to stop autoboot: 0 Ventana > print ethaddr ethaddr=00:d0:12:f3:f2:f5 Ventana > dm tree ... ethernet 0 [ + ] fecmxc | | |-- ethernet@2188000 bootdev 0 [ ] eth_bootdev | | | |-- [email protected] mdio 0 [ + ] fec_mdio | | | `-- mdio dsa 0 [ + ] mv88e6xxx | | | `-- switch@0 ethernet 1 [ + ] dsa-port | | | |-- lan4 bootdev 2 [ ] eth_bootdev | | | | `-- switch@[email protected] ethernet 2 [ + ] dsa-port | | | |-- lan3 bootdev 3 [ ] eth_bootdev | | | | `-- switch@[email protected] ethernet 3 [ + ] dsa-port | | | |-- lan2 bootdev 4 [ ] eth_bootdev | | | | `-- switch@[email protected] ethernet 4 [ + ] dsa-port | | | |-- lan1 bootdev 5 [ ] eth_bootdev | | | | `-- switch@[email protected] mdio 1 [ + ] mv88e6xxx_mdio | | | `-- mv88e6xxx-mdio-0 ... Ventana > net list eth0 : ethernet@2188000 00:d0:12:f3:f2:f5 active eth1 : lan4 00:d0:12:f3:f2:f5 eth2 : lan3 00:d0:12:f3:f2:f5 eth3 : lan2 00:d0:12:f3:f2:f5 eth4 : lan1 00:d0:12:f3:f2:f5 Ventana > setenv ethact lan4 Ventana > dhcp BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 172.24.33.142 (1076 ms) I do not use CONFIG_NET_RANDOM_ETHADDR and have a single MAC address allocated to the board. What board are you using and what does its fec/mdio dt look like? Best Regards, Tim
