On Thu, Jan 29, 2026 at 11:19 PM Tom Rini <[email protected]> wrote: > > On Thu, Jan 29, 2026 at 11:06:59PM +0800, Sune Brian wrote: > > On Thu, Jan 29, 2026 at 10:54 PM Tom Rini <[email protected]> wrote: > > > > > > On Thu, Jan 29, 2026 at 10:58:21AM +0800, Sune Brian wrote: > > > > On Wed, Jan 28, 2026 at 10:51 PM Tom Rini <[email protected]> wrote: > > > > > > > > > > On Wed, Jan 28, 2026 at 10:49:37PM +0800, Sune Brian wrote: > > > > > > > > > > > Hi Tom, > > > > > > > > > > > > The commits after c08da5d03c2a0b72e81a11ff7ca507e3a6414db3 > > > > > > All Cyclone V boards are unable to boot, not sure this patch is the > > > > > > fix? > > > > > > > > > > > > > Hi Tom, > > > > > > > > > Yes, those commits were unintentional and have been reverted. > > > > > > > > Had tested the last commit 6a1bdb7e952d5841f42742fefa907cae5dc8d50a > > > > Same situation that the boards are unable to enter the SPL phase. > > > > The commit 8de6e8f8a076d2c9b6d38d8563db135c167077ec works properly. > > > > After that things are broken. > > > > > > Please give > > > https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ > > > a try as I think it might have been working before by alignment luck > > > rather than design. > > > > Hi Tom, > > > > It is the revert itself that is broken. > > I tested f4dfa5d3c2680322fd17fcc7c6221876e00a03c2 > > > > > > U-Boot SPL 2026.01-00754-gf4dfa5d3c268-dirty (Jan 29 2026 - 22:56:17 +0800) > > Trying to boot from MMC1 > > > > Which revert is correct. > > > > But once dc2d8423b19d30472b02e02b41504226908a4291 > > And revert to 431f1ce46bbffff0db8f03437a34400b11b30175 > > > > Then all these broken I don't understand why even file diff cannot > > show any changes. > > > > Do you mean the revert is broken and fixed by alignment? > > I mean that arbitrary changes (as part of testing these things, the > "-dirty" in the version string would lead to failing trees now passing) > can make the difference between pass/fail to boot. Did you try Marek's > patch I linked to?
Yes, I had tried. Cannot boot same as I had mentioned failing commit #. I apply that patch on the latest master commit. Thanks > > -- > Tom
