Change to depend on correct xPL symbol instead of a xPL symbol intended for a different phase to make affected symbols available for correct phase.
Signed-off-by: Jonas Karlman <[email protected]> --- arch/Kconfig | 2 +- common/spl/Kconfig | 2 +- drivers/core/Kconfig | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/Kconfig b/arch/Kconfig index 8d63afeb138e..408e53524e5f 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -508,7 +508,7 @@ config SPL_SKIP_LOWLEVEL_INIT config TPL_SKIP_LOWLEVEL_INIT bool "Skip calls to certain low level initialization functions in TPL" - depends on SPL && ARM + depends on TPL && ARM help If enabled, then certain low level initializations (like setting up the memory controller) are omitted and/or U-Boot does not relocate diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 0618f42c9410..988d815f8c79 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1768,7 +1768,7 @@ config TPL source "common/spl/Kconfig.tpl" config VPL - depends on SUPPORT_SPL && !COMPILE_TEST + depends on SUPPORT_VPL && !COMPILE_TEST bool "Enable VPL" help If you want to build VPL as well as the normal image, TPL and SPL, diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index ae0c34667723..a0e252b0529c 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -394,8 +394,8 @@ config TPL_OF_TRANSLATE smaller in size than fdt_translate_address() config VPL_OF_TRANSLATE - bool "Translate addresses using fdt_translate_address in SPL" - depends on SPL_DM && VPL_OF_CONTROL + bool "Translate addresses using fdt_translate_address in VPL" + depends on VPL_DM && VPL_OF_CONTROL help If this option is enabled, the reg property will be translated using the fdt_translate_address() function. This is necessary -- 2.54.0
