OpenOCD has moved where it has placed the tcl scripts for TI's reference boards. Update their paths to the new locations
Signed-off-by: Bryan Brattlof <[email protected]> --- doc/board/ti/am6254atl_sk.rst | 10 +--------- doc/board/ti/am62ax_sk.rst | 10 +--------- doc/board/ti/am62dx_evm.rst | 17 ++++++----------- doc/board/ti/am62px_sk.rst | 12 +----------- doc/board/ti/am62x_sk.rst | 9 +-------- doc/board/ti/am64x_evm.rst | 17 +++++++++++++++++ doc/board/ti/am65x_evm.rst | 10 +--------- doc/board/ti/j7200_evm.rst | 10 +--------- doc/board/ti/j721e_evm.rst | 10 +--------- doc/board/ti/j722s_evm.rst | 12 +----------- doc/board/ti/j784s4_evm.rst | 10 +--------- 11 files changed, 32 insertions(+), 95 deletions(-) diff --git a/doc/board/ti/am6254atl_sk.rst b/doc/board/ti/am6254atl_sk.rst index 18a3520b39c7..7f919b10a8d7 100644 --- a/doc/board/ti/am6254atl_sk.rst +++ b/doc/board/ti/am6254atl_sk.rst @@ -289,14 +289,6 @@ Debugging U-Boot See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for detailed setup information. -.. warning:: - - **OpenOCD support since**: v0.12.0 - - If the default package version of OpenOCD in your development - environment's distribution needs to be updated, it might be necessary to - build OpenOCD from the source. - .. include:: k3.rst :start-after: .. k3_rst_include_start_openocd_connect_XDS110 :end-before: .. k3_rst_include_end_openocd_connect_XDS110 @@ -305,4 +297,4 @@ To start OpenOCD and connect to the board .. prompt:: bash $ - openocd -f board/ti_am625evm.cfg + openocd -f board/ti/am625evm.cfg diff --git a/doc/board/ti/am62ax_sk.rst b/doc/board/ti/am62ax_sk.rst index 6f3432f7895c..2b338569aad6 100644 --- a/doc/board/ti/am62ax_sk.rst +++ b/doc/board/ti/am62ax_sk.rst @@ -224,14 +224,6 @@ Debugging U-Boot See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for detailed setup information. -.. warning:: - - **OpenOCD support since**: August 2023 (git master) - - Until the next stable release of OpenOCD is available in your development - environment's distribution, it might be necessary to build OpenOCD `from the - source <https://github.com/openocd-org/openocd>`_. - .. include:: k3.rst :start-after: .. k3_rst_include_start_openocd_connect_XDS110 :end-before: .. k3_rst_include_end_openocd_connect_XDS110 @@ -240,4 +232,4 @@ To start OpenOCD and connect to the board .. prompt:: bash - openocd -f board/ti_am62a7evm.cfg + openocd -f board/ti/am62a7evm.cfg diff --git a/doc/board/ti/am62dx_evm.rst b/doc/board/ti/am62dx_evm.rst index 0d12e3ec1476..28f62914b3bc 100644 --- a/doc/board/ti/am62dx_evm.rst +++ b/doc/board/ti/am62dx_evm.rst @@ -235,16 +235,6 @@ Debugging U-Boot See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for detailed setup information. -.. warning:: - - **AM62A**: OpenOCD support since August 2023 (git master) - - **AM62D**: Uses AM62A configuration (compatible due to same core architecture) - - Until the next stable release of OpenOCD is available in your development - environment's distribution, it might be necessary to build OpenOCD `from the - source <https://github.com/openocd-org/openocd>`_. - .. include:: k3.rst :start-after: .. k3_rst_include_start_openocd_connect_XDS110 :end-before: .. k3_rst_include_end_openocd_connect_XDS110 @@ -253,4 +243,9 @@ To start OpenOCD and connect to the board .. prompt:: bash - openocd -f board/ti/am62a7evm.cfg + openocd -f board/ti/am62a7evm.cfg + +.. note:: + + The AM62D-EVM uses the same tcl configuration as the AM62A-SK due to + same core architecture. diff --git a/doc/board/ti/am62px_sk.rst b/doc/board/ti/am62px_sk.rst index 44dae4afc870..d2696282033c 100644 --- a/doc/board/ti/am62px_sk.rst +++ b/doc/board/ti/am62px_sk.rst @@ -329,16 +329,6 @@ Debugging U-Boot See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for detailed setup information. -.. warning:: - - **OpenOCD support after**: v0.12.0 - - While support for the entire K3 generation including the am62xxx - extended family was added before v0.12.0, the tcl scripts for the - am62px have been accepted and will be available in the next release of - OpenOCD. It may be necessary to build OpenOCD from source depending on - the version your distribution has packaged. - .. include:: k3.rst :start-after: .. k3_rst_include_start_openocd_connect_XDS110 :end-before: .. k3_rst_include_end_openocd_connect_XDS110 @@ -347,4 +337,4 @@ To start OpenOCD and connect to the board .. prompt:: bash - openocd -f board/ti_am62pevm.cfg + openocd -f board/ti/am62pevm.cfg diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst index ef9425035cb8..ab5dee1ac775 100644 --- a/doc/board/ti/am62x_sk.rst +++ b/doc/board/ti/am62x_sk.rst @@ -851,13 +851,6 @@ Debugging U-Boot See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for detailed setup information. -.. warning:: - - **OpenOCD support since**: v0.12.0 - - If the default package version of OpenOCD in your development - environment's distribution needs to be updated, it might be necessary to - build OpenOCD from the source. .. include:: k3.rst :start-after: .. k3_rst_include_start_openocd_connect_XDS110 @@ -867,4 +860,4 @@ To start OpenOCD and connect to the board .. prompt:: bash $ - openocd -f board/ti_am625evm.cfg + openocd -f board/ti/am625evm.cfg diff --git a/doc/board/ti/am64x_evm.rst b/doc/board/ti/am64x_evm.rst index 65c4c456528c..dbbdfe0e8036 100644 --- a/doc/board/ti/am64x_evm.rst +++ b/doc/board/ti/am64x_evm.rst @@ -227,3 +227,20 @@ https://www.ti.com/lit/pdf/spruim2 under the `Boot Mode Pins` section. For SW2 and SW3, the switch state in the "ON" position = 1. Boot bits on SK is reversed bits to the bootmode signals + + +Debugging U-Boot +---------------- + +See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for +detailed setup information. + +.. include:: k3.rst + :start-after: .. k3_rst_include_start_openocd_connect_XDS110 + :end-before: .. k3_rst_include_end_openocd_connect_XDS110 + +To start OpenOCD and connect to the board + +.. prompt:: bash + + openocd -f board/ti/am642evm.cfg diff --git a/doc/board/ti/am65x_evm.rst b/doc/board/ti/am65x_evm.rst index 60b08ceebf0f..12fa955d2bf5 100644 --- a/doc/board/ti/am65x_evm.rst +++ b/doc/board/ti/am65x_evm.rst @@ -305,14 +305,6 @@ Debugging U-Boot See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for detailed setup information. -.. warning:: - - **OpenOCD support since**: v0.12.0 - - If the default package version of OpenOCD in your development - environment's distribution needs to be updated, it might be necessary to - build OpenOCD from the source. - .. include:: k3.rst :start-after: .. k3_rst_include_start_openocd_connect_XDS110 :end-before: .. k3_rst_include_end_openocd_connect_XDS110 @@ -321,4 +313,4 @@ To start OpenOCD and connect to the board .. prompt:: bash $ - openocd -f board/ti_am654evm.cfg + openocd -f board/ti/am654evm.cfg diff --git a/doc/board/ti/j7200_evm.rst b/doc/board/ti/j7200_evm.rst index 4fd2aff83547..74bce4b465d7 100644 --- a/doc/board/ti/j7200_evm.rst +++ b/doc/board/ti/j7200_evm.rst @@ -216,14 +216,6 @@ Debugging U-Boot See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for detailed setup information. -.. warning:: - - **OpenOCD support since**: v0.12.0 - - If the default package version of OpenOCD in your development - environment's distribution needs to be updated, it might be necessary to - build OpenOCD from the source. - .. include:: k3.rst :start-after: .. k3_rst_include_start_openocd_connect_XDS110 :end-before: .. k3_rst_include_end_openocd_connect_XDS110 @@ -232,4 +224,4 @@ To start OpenOCD and connect to the board .. prompt:: bash $ - openocd -f board/ti_j7200evm.cfg + openocd -f board/ti/j7200evm.cfg diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst index 41c8d4c72a8d..1302e080d8a8 100644 --- a/doc/board/ti/j721e_evm.rst +++ b/doc/board/ti/j721e_evm.rst @@ -245,14 +245,6 @@ Debugging U-Boot See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for detailed setup information. -.. warning:: - - **OpenOCD support since**: v0.12.0 - - If the default package version of OpenOCD in your development - environment's distribution needs to be updated, it might be necessary to - build OpenOCD from the source. - .. include:: ../ti/k3.rst :start-after: .. k3_rst_include_start_openocd_connect_XDS110 :end-before: .. k3_rst_include_end_openocd_connect_XDS110 @@ -261,4 +253,4 @@ To start OpenOCD and connect to the board .. prompt:: bash $ - openocd -f board/ti_j721eevm.cfg + openocd -f board/ti/j721evm.cfg diff --git a/doc/board/ti/j722s_evm.rst b/doc/board/ti/j722s_evm.rst index 4b5cf0275940..5a4ae11a2eb6 100644 --- a/doc/board/ti/j722s_evm.rst +++ b/doc/board/ti/j722s_evm.rst @@ -237,16 +237,6 @@ Debugging U-Boot See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for detailed setup information. -.. warning:: - - **OpenOCD support after**: v0.12.0 - - While support for the entire K3 generation including the am62xxx - extended family was added before v0.12.0, the tcl scripts for the - am62px have been accepted and will be available in the next release of - OpenOCD. It may be necessary to build OpenOCD from source depending on - the version your distribution has packaged. - .. include:: k3.rst :start-after: .. k3_rst_include_start_openocd_connect_XDS110 :end-before: .. k3_rst_include_end_openocd_connect_XDS110 @@ -255,4 +245,4 @@ To start OpenOCD and connect to the board .. prompt:: bash - openocd -f board/ti_j722sevm.cfg + openocd -f board/ti/j722sevm.cfg diff --git a/doc/board/ti/j784s4_evm.rst b/doc/board/ti/j784s4_evm.rst index ec82228ab908..48decd8d3d64 100644 --- a/doc/board/ti/j784s4_evm.rst +++ b/doc/board/ti/j784s4_evm.rst @@ -643,14 +643,6 @@ Debugging U-Boot See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for detailed setup information. -.. warning:: - - **OpenOCD support since**: September 2023 (git master) - - Until the next stable release of OpenOCD is available in your development - environment's distribution, it might be necessary to build OpenOCD `from the - source <https://github.com/openocd-org/openocd>`_. - Debugging U-Boot on J784S4-EVM and AM69-SK ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -663,4 +655,4 @@ following. .. prompt:: bash - openocd -f board/ti_j784s4evm.cfg + openocd -f board/ti/j784s4evm.cfg -- 2.54.0
