On Fri, 09 Oct 2026 11:14:03 -0500, David Lechner wrote:
> arm: mediatek: add eDP display support for Genio 520 and 720 EVKs
>
> Add an eDP display path for the MT8189 and use it for the panel on the
> eDP connector of the Genio 520 and 720 EVKs. The pipeline is the same
> OVL -> RDMA one the DSI path uses, with the output crossbar switched to
> a DVO stage that feeds the eDP transmitter. The panel mode comes from
> its EDID over the AUX channel.
>
> [...]
Applied to mediatek-for-main, thanks!
[01/13] board: mediatek: MAINTAINERS: match the Genio 520/720 files with globs
commit: 6d72b1abf5cb163f2c9d3c421c31d69d4a6ad854
[02/13] linux: drm_dp_helper: add the definitions needed for eDP link training
commit: bafda3d17fd50dd881bcb1043e85100b1ebfd4c5
[03/13] phy: add the DisplayPort PHY configuration options
commit: 08018248963536da838d7904655c2739577034c5
[04/13] phy: mediatek: add an MT8189 eDP PHY driver
commit: df7f4c295a251273e3250f22278b6de7bedcbd23
[05/13] video: mediatek: mtk_ddp: allow routing the OVL output to DVO
commit: d11e730a2807cda9f3c97a3209e8e30a2ccf90ff
[06/13] video: mediatek: mtk_disp_mutex: add DVO support
commit: ee31b38bdf49d31f4cb929854cb69445d78fafbd
[07/13] video: mediatek: add a DVO driver
commit: 47e4f02283e2179c8948e4e283d3570f777c4b82
[08/13] video: mediatek: build the overlay with the shared pipeline
commit: 44f4846ca09cbebfb5d1fdb5f6810a69e0c7481b
[09/13] video: mediatek: add an eDP driver
commit: 0cf066fe2e331fac4d5e62590ef3a4a2f9c080c8
[10/13] arm: dts: mediatek: mt8189: add the eDP display path
commit: 87174f126e2ff59ed20aeccd851455e47809b874
[11/13] arm: dts: mediatek: describe the eDP panel on the Genio 520 and 720 EVKs
commit: 54d33f94f8df1e76ad2133224bcc439b351dc34d
[12/13] arm: dts: mediatek: add an eDP overlay for the Genio 520 and 720 EVKs
commit: 68cf5df03974e8ae8cbb300cba0b93280c49e913
[13/13] configs: mt8189: enable the eDP display path
commit: 65c7c895e0c919612f15ccdbe113c84546a342ed
Best regards,
--
David Lechner <[email protected]>
