Sara,
You should look at the /etc/xinetd.d/telnet file. Make sure
that disabled is set to no (or commented out). You want to also look
for a line that says only_from and comment that out. Run
/etc/init.d/xinetd restart and you should be good.
-Mike
-----Original Message-----
From: Sara Burns [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 01, 2004 12:46 AM
To: '[EMAIL PROTECTED]'
Subject: [U2] UV on Red Hat Linux
We are missing something obvious here - can anyone assist by pointing me
in
the right direction (we have even read the manuals - but haven't found
the
vital key)
We obtained a copy of Red Hat RHEL 3 from IBM to test moving to this
platform. It is installed on a test PC and forms part of an isolated
network with a W2003 PDC and an NT4 workstation. UV 10.1 is installed
and
running.
Problem: We cannot telnet to this box from our NT4 workstation. We can
ping the box but a plain windows NT4 telnet session gives a Connect
Failed
message.
We can telnet into UV from the Linux server (to itself) and we can
telnet
out from the Linux server to the NT4 workstation (where we also have a
version of UV running from a previous test), but not from NT4 into the
Linux
box.
Any suggestions would be very welcome - on or off line.
Sara Burns
Sara Burns (SEB)
Development Team Leader
Public Trust
Phone: +64 (04) 474-3841 (DDI)
Mobile: 027 457 5974
< <mailto:[EMAIL PROTECTED]>
mailto:[EMAIL PROTECTED]>
Information contained in this communication is confidential. If you are
not
the intended recipient the information should not be used, disclosed,
copied
or commercialised. The information is not necessarily the views nor the
official communication of Public Trust. No guarantee or representation
is
made that the communication is free of errors, virus or interference.
-------
u2-users mailing list
[EMAIL PROTECTED]
To unsubscribe please visit http://listserver.u2ug.org/
-------
u2-users mailing list
[EMAIL PROTECTED]
To unsubscribe please visit http://listserver.u2ug.org/
