David, Bill, The following procedure for changing the telnet port for UV/NT outside of UniAdmin was provided by Monolith Corp.:
Problem/Issue: Defining the UV telnet port outside of Uni Admin Resolution/Information: The uvtelnet service in not defined in the %SystemRoot%\system32\drivers\etc\services or its definition is found after the uvtelnets service. If the uvtelnet service is not found in the services file, add a new entry, making sure it is defined before the uvtelnets service. If the uvtelnet service is found after the uvtelnets service definition, move the entry before the uvtelnets entry. The uvtelnet service should look similar to : uvtelnet portnumber/tcp #UniVerse telnet where port number should be replaced by the port number you wish to use. I found the services file on our Win 2000 Pro server at C:\winnt\system32\drivers\etc\services. The uvtelnet line is near or at the bottom of the file. Just change the portnumber and file it. Then Stop and Restart the Universe Services in Universe Control. Thank you Monolith for your continued support. hth, Dave Dave Taylor President Sysmark Information Systems, Inc. 49 Aspen Way Rolling Hills Estates, CA 90274 800-SYSMARK (800-797-6275) (O) 310-544-1974 (P) 800-339-1497 (F) 310-377-3550 Your Source for Integrated EDI Translation and DataSync Integration www.sysmarkinfo.com ----- Original Message ----- From: "Bill_H" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, August 10, 2005 4:57 PM Subject: RE: Re[2]: [U2] Connection Problems with Ud6 and UV10 > Dave: > > I'm just guessing here but I wonder if there is a registry setting inke in > HLM > Software > Informix (or is it IBM) > Universe (or UniData) that sets > the port for telnet. > > Bill > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > David Tod Sigafoos > > Sent: Wednesday, August 10, 2005 4:02 PM > > To: Ron White > > Subject: Re[2]: [U2] Connection Problems with Ud6 and UV10 > > > > Ron, > > > > Wednesday, August 10, 2005, 1:01:03 PM, you wrote: > > > > RW> Launch UniAdmin and select Telnet under the Network > > services header. > > RW> When the screen appears, the first thing on the screen is the > > RW> desired telnet port number. > > RW> After entering your port number, click the stop button to > > stop the > > RW> UV services and then click start to restart them. If you are > > RW> accessing UV with a terminal emulator you will have to > > change your > > RW> telnet port setting in the emulator as well. > > > > I start UniAdmin and Local Host shows on the left. > > The menu items are File, View, COnnect, Admin, Window, > > Logging and Help > > > > Under Admin is Network Services. Problem is that ALL items > > under Admin are grayed out. > > > > I find that if i use uniadmin on another server those items > > don't become available until a connection has been made. > > > > So is this one of those chicken and egg things <G> > > > > > > > > -- > > DSig ````` > > David Tod Sigafoos ( O O ) > > _______oOOo__( )__oOOo_______ > > > > Should any political party attempt to abolish social > > security, unemployment insurance, and eliminate labor laws > > and farm programs, you would not hear of that party again in > > our political history. There is a tiny splinter group, of > > course, that believes you can do these things. Among them > > are a few Texas oil millionaires, and an occasional > > politician or business man from other areas. Their number is > > negligible and they are stupid. --President Dwight D. > > Eisenhower, 1954 (source: Eisenhower Presidential Papers, > > Document #1147; November 8, 1954 The Papers of Dwight David > > Eisenhower, Volume XV - The Presidency: The Middle Way Part > > VI: Crises Abroad, Party Problems at Home; September 1954 to > > December 1954,) Chapter 13: "A new phase of political experience" > > ------- > > u2-users mailing list > > [email protected] > > To unsubscribe please visit http://listserver.u2ug.org/ > ------- > u2-users mailing list > [email protected] > To unsubscribe please visit http://listserver.u2ug.org/ ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/
