What problem are we trying to fix at the moment? It may be worth confirming again what does and does not work as there have been lots of suggestions and I am no longer clear as to whether some have made any difference and whether the DB itself is working...
I would drill in per other suggestions as follows: Does the DB work? - Start a command prompt cd to an account and udt from there. What port is the UDT telnet service running on? Confirm by using netstat that there is a listener running on the port. Does telnet from the machine to itself work? Are you using wIntegrate or SB Client? If so, prove whether MS Telnet client works - I have seen on occasion that SB Client will not connect yet MS Telnet will. (Although SB Client will then work once MS Telnet has found a way through...) Check whether telnetcfg.exe on the server end shows what you think it should for the connections. You indicate that the Windows firewall is perhaps a bit confused, Microsoft's support pages have lots of answers about firewall settings and debugging, so I'd definitely suggest using the log features and so on... It may be worth reiterating what other steps have been tried and the successes or failures that these have had... This e-mail is for the use of the intended recipient(s) only. If you have received this e-mail in error, please notify the sender immediately and then delete it. If you are not the intended recipient, you must not use, disclose or distribute this e-mail without the author's prior permission. We have taken precautions to minimize the risk of transmitting software viruses, but we advise you to carry out your own virus checks on any attachment to this message. We cannot accept liability for any loss or damage caused by software viruses. ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/
