Before removing, try (at unix prompt)
#netstat -rn
You should see both old and new gateway ip address. To remove the old
gateway address, use
#smitty tcpip
--> Further configuration ----> Static Routes
At Remove a Static Route
Remove Static Route
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Destination TYPE net
+
* DESTINATION Address [0]
(dotted decimal or symbolic name)
* Default GATEWAY Address [xx.xx.xx.xx]
(dotted decimal or symbolic name)
Network MASK (hexadecimal or dotted decimal) []
Destination Address - use '0' to denote 'default'
xx.xx.xx.xx - Old gateway ip address
HTH
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob Witney
Sent: Wednesday, August 06, 2008 5:15 PM
To: [email protected]
Subject: [U2] default gateway problem
Ok I know that this is a tad of topic but I am hoping that those nice
IBM chaps are monitoring
We are on a Pseries running AIX 5.3 and Universe 10
We have changed out default gateway,
I know, leave things alone I say, if its not broken don't fix it, but
you know what there network techies are like, fiddle, fiddle, fiddle
Anyway:
we user smit assist - Configure Network Communications' - TCP/IP
Startup - pick our interface
Drop down to default gateway and change the ipaddress
Works fine
Until we re-boot at which point it reverts to the default gateway we had
before the change
It may be we should run ifconfig or something to "lock" our change in
but I can't see it anywhere in the books
Any suggestions would be great
Bob Witney
IT Senior
Explore Worldwide
Nelson House
55 Victoria Road
Farnborough
Hants
GU14 7PA
Confidentiality Notice: This e-mail and any attachments are intended solely
for the addressee and may contain confidential or privileged information.
If you are not the named addressee, or the person responsible for delivering
the message to the named addressee, please notify the sender as soon as
possible and delete the material from your computer. This message will be
protected by copyright. If it has come to you in error, you must not take
any
action based on its contents nor must you copy or show the message to any
person other than the intended recipient.
_____________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
-------
u2-users mailing list
[email protected]
To unsubscribe please visit http://listserver.u2ug.org/
-------
u2-users mailing list
[email protected]
To unsubscribe please visit http://listserver.u2ug.org/
