Not that I am considering doing the same... but which UVCONFIG parameters would you suggest Adam change? Now I'm curious... not having that much knowledge of those...
On Tue, Aug 9, 2011 at 8:17 PM, Hona, David <david.h...@cba.com.au> wrote: > Is your UVCONFIG parameters still set to the default values? > > If so, you need to change these to suit. You can baseline them using your > previous UVCONFIG parameters from your old host and see how your application > performs. Further tweaking of them may be required if your application > profile (utilisation requirements), etc. has changed. > > Also, what was the previous release of UV you were on previously? > > Regards > David > > > -----Original Message----- > From: u2-users-boun...@listserver.u2ug.org [mailto: > u2-users-boun...@listserver.u2ug.org] On Behalf Of Adam Taylor > Sent: Wednesday, 10 August 2011 12:17 AM > To: u2-users@listserver.u2ug.org > Subject: [U2] UV 11.1 64-bit on Cisco UCS with NetApp Filer? > > All, > > We recently upgraded and virtualized our UniVerse servers to UV 11.1 64-bit > on a Cisco UCS B Series platform with a NetApp 3040A/A Filer. Going to > 64-bit with an upgrade in the virtualized environment, we expected to see a > noticeable (if not significant) increase in performance than we were > achieving on our old physical 32-bit server. However, not only has > performance not notably increased, we are having random slowdowns in various > areas of the system that were not occurring before. I say random, because > while it does seem to affect certain areas more, it is not consistent. > > Some examples of behavior that has changed since the virtualization: > > An SB screen that has some calculated fields on it will take a minute to > load, but the next time it loads it loads in just a couple seconds for the > same record. > An ASP webpage with 10+ queries against different files (heavy-duty > processes) using Web DE to connect will takes 5-6 minutes to load that was > only taking a minute before. > Randomly, saving a change in the SBClient screen designer on our Dev > environment will hang for 20-30 seconds. (Same virtualized specs, but far > less traffic due to being a dev environment.) > Simply initiating a telnet session, sometimes it will be 10-15 seconds > before the login prompt appears to enter username and password. > > Does anyone out there have any experience with any of these pieces (UV 11.1 > 64-bit, Cisco UCS, NetApp Filer) that could shed some light on why we are > now seeing these performance issues? > > Thanks. > > > Adam Taylor > Director of Software Development > O: (713) 795-2352 > www.INXI.com > > > ************** IMPORTANT MESSAGE ***************************** > This e-mail message is intended only for the addressee(s) and contains > information which may be > confidential. > If you are not the intended recipient please advise the sender by return > email, do not use or > disclose the contents, and delete the message and any attachments from your > system. Unless > specifically indicated, this email does not constitute formal advice or > commitment by the sender > or the Commonwealth Bank of Australia (ABN 48 123 123 124) or its > subsidiaries. > We can be contacted through our web site: commbank.com.au. > If you no longer wish to receive commercial electronic messages from us, > please reply to this > e-mail by typing Unsubscribe in the subject line. > ************************************************************** > > > > _______________________________________________ > U2-Users mailing list > U2-Users@listserver.u2ug.org > http://listserver.u2ug.org/mailman/listinfo/u2-users > -- John Thompson _______________________________________________ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users