I would not expect changing terminal type to fix the problem once you've
got the problem.  Do you have some specific coding or other requirements
for the Wyse60?  Does the same thing happen if you start a clean session
using Wyse50 or Wyse120?

I know I'm not helping discover what to do to fix your problem but
without a bunch of time and the ability to duplicate the problem the
best I can really help with is to try and avoid the problem in the first
place.

-----Original Message-----
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Lunt, Bruce
Sent: Friday, December 07, 2012 2:50 PM
To: U2 Users List
Subject: Re: [U2] SB Client question

The terminal emulation is Wyse60. I don't use the insert key when at TCL
because I just enter 'I' at the command prompt when I am in the editor
and there is never a reason for insert key to be pressed otherwise. I am
not sure how to reassign the key but I don't think that I want to do
that because I do use the insert key when I am in the full-screen editor
or SB+ screen.  I went to the Setup tab and changed the terminal type to
VT220 and the editor worked like it should but when I changed it back to
Wyse60 it had the same old problem. 

-----Original Message-----
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Woodward, Bob
Sent: Friday, December 07, 2012 2:40 PM
To: U2 Users List
Subject: Re: [U2] SB Client question

I've never had this problem but I'd look at the terminal emulation
you're using.  You might try using a different terminal type then see if
you can replicate the problem.  I would imagine you don't use the insert
key since it seems to mess you up (only at TCL???) so maybe redefine
just that key?

Good luck.
BobW

-----Original Message-----
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Lunt, Bruce
Sent: Friday, December 07, 2012 2:26 PM
To: u2-users@listserver.u2ug.org
Subject: [U2] SB Client question

Hi All,

This is a question that has been puzzling me for years and I am finally
going to ask if there is help for me. :-)

What happens is I will be typing at real TCL (on HP9000 Unix running SB+
5.2) and I will accidentally hit the 'Insert' key that it just to the
right of the 'Backspace' key. Well, after I do this my backspace will no
longer work. What I see on the screen when I enter the backspace key is
the letters to the left are displayed to the right of the cursor
preceded by a space. I can enter the replacement character(s) and they
will work but when I look at the line to check it the line will always
have: '*--:' appended to the end of the line. It does not matter what I
do after this to try to get back to what was working before. (I do
plenty of backspacing so this is not a small problem.) The only thing
that works is to logoff and then log back on. This will reset the editor
to work correctly again. I have tried hitting the 'Insert' key again,
thinking that it would switch back to the original mode, to no avail.
Has this happened to anyone else? Or am I the only lucky one with this
problem? If it has happened to you, do you have another fix besides
logging off the system?

Thanks in advance,

Bruce Lunt
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users

Reply via email to