I have them in the same room, 6 feet each other and with minimum output power.
I configured another NSM5 with same settings than the NSlocoM5, and it associated with no problem. At this point I think this Loco is probably a bad radio. ----- Original Message ----- From: Adair Winter To: Ubiquiti Users Group Sent: Thursday, November 27, 2014 10:19 AM Subject: Re: [Ubnt_users] Quick question on XM & XW firmwares Than something still isn't set exactly right. SSID has to match exactly Channel width has to match (10,20,30Mhz) Channel shifting Security (if any) are these radios in the same room? How are you testing them? On Thu, Nov 27, 2014 at 9:13 AM, Eduardo <[email protected]> wrote: No security. ----- Original Message ----- From: Josh Luthman To: Ubiquiti Users Group Sent: Thursday, November 27, 2014 9:54 AM Subject: Re: [Ubnt_users] Quick question on XM & XW firmwares If you mismatch security it associated and even pulls DHCP...but you can't do anything else. It won't ping or respond or anything. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 27, 2014 9:42 AM, "Adair Winter" <[email protected]> wrote: are you running any type of security? On Thu, Nov 27, 2014 at 6:00 AM, Eduardo <[email protected]> wrote: I have the radios configured with same SSID, channel width, AirMax and WDS are enabled; I have tried DFS and the 5735-5840 frequencies and still can't make them associate each other. Am I missing something? ----- Original Message ----- From: Chris Ruschmann To: Ubiquiti Users Group Sent: Wednesday, November 26, 2014 7:49 PM Subject: Re: [Ubnt_users] Quick question on XM & XW firmwares You can associate an XM with an XW and vice versa. I have this setup all over my network. What you can’t do is associate an XW nano beam with an XM or XW UBNT device in the DFS Range as nano beams don’t support DFS, but legacy gear does. From: [email protected] [mailto:[email protected]] On Behalf Of Eduardo Sent: Wednesday, November 26, 2014 3:11 PM To: Ubiquiti Users Group Subject: [Ubnt_users] Quick question on XM & XW firmwares I have a NSlocoM5 with XW firmware and need it to associate with an NSM5-AP that has XM firmware. Has someone ever tried to change a XW firmware for a XM firmware in a NSlocoM5? Eduardo -------------------------------------------------------------------- _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users -------------------------------------------------------------------------- _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ------------------------------------------------------------------------------ _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
