Matt is right. As long as WDS is functioning. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 27, 2014 12:13 PM, "Matt Hoppes" <[email protected]> wrote:
> I also disagree. In bridge mode the radios will pass whatever subnet > information is being passed across. I do this all day long. > > > > Matt Hoppes > Director of Information Technology > Indigo Wireless > +1 (570) 723-7312 > > On 11/27/14, 12:10 PM, Adair Winter wrote: > > No offense, but I disagree with this statement. > > in a few thousand radios I've never seen a radio not connect if the > > wireless tab settings were the same. > > It will however not show a receive rate if the subnets do not match. > > From his description the radios never connect. It's not just simply that > > they wont pass traffic. > > > > > > On Thu, Nov 27, 2014 at 11:08 AM, Rory Conaway <[email protected] > > <mailto:[email protected]>> wrote: > > > > Make sure they are in the same subnet also. For some reason, if two > > radios are in different subnets, even if they are in bridge mode, > > they won’t connect.____ > > > > __ __ > > > > Rory____ > > > > __ __ > > > > *From:*[email protected] > > <mailto:[email protected]> > > [mailto:[email protected] > > <mailto:[email protected]>] *On Behalf Of *Eduardo > > *Sent:* Thursday, November 27, 2014 5:00 AM > > *To:* Ubiquiti Users Group > > *Subject:* Re: [Ubnt_users] Quick question on XM & XW firmwares____ > > > > __ __ > > > > I have the radios configured with same SSID, channel width, > > AirMax and WDS are enabled; I have tried DFS and the 5735-5840 > > frequencies and still can't make them associate each other.____ > > > > ____ > > > > Am I missing something?____ > > > > ____ > > > > ----- Original Message ----- ____ > > > > *From:*Chris Ruschmann <mailto:[email protected]> ____ > > > > *To:*Ubiquiti Users Group <mailto:[email protected]> ____ > > > > *Sent:*Wednesday, November 26, 2014 7:49 PM____ > > > > *Subject:*Re: [Ubnt_users] Quick question on XM & XW > firmwares____ > > > > __ __ > > > > You can associate an XM with an XW and vice versa. I have this > > setup all over my network.____ > > > > ____ > > > > What you can’t do is associate an XW nano beam with an XM or XW > > UBNT device in the DFS Range as nano beams don’t support DFS, > > but legacy gear does.____ > > > > ____ > > > > *From:*[email protected] > > <mailto:[email protected]> > > [mailto:[email protected] > > <mailto:[email protected]>] *On Behalf Of *Eduardo > > *Sent:* Wednesday, November 26, 2014 3:11 PM > > *To:* Ubiquiti Users Group > > *Subject:* [Ubnt_users] Quick question on XM & XW firmwares____ > > > > ____ > > > > I have a NSlocoM5 with XW firmware and need it to associate with > > an NSM5-AP that has XM firmware.____ > > > > ____ > > > > Has someone ever tried to change a XW firmware for a XM firmware > > in a NSlocoM5?____ > > > > ____ > > > > Eduardo____ > > > > ____ > > > > ____ > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Ubnt_users mailing list > > [email protected] <mailto:[email protected]> > > http://lists.wispa.org/mailman/listinfo/ubnt_users____ > > > > > > _______________________________________________ > > Ubnt_users mailing list > > [email protected] <mailto:[email protected]> > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > > > > > -- > > > > Adair Winter > > VP, Network Operations / Owner > > Amarillo Wireless | 806.316.5071 > > C: 806.231.7180 > > http://www.amarillowireless.net > > > > > > > > > > _______________________________________________ > > Ubnt_users mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
