Make sure they are in the same subnet also. For some reason, if two radios are in different subnets, even if they are in bridge mode, they won’t connect.
Rory From: [email protected] [mailto:[email protected]] On Behalf Of Eduardo Sent: Thursday, November 27, 2014 5:00 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Quick question on XM & XW firmwares I have the radios configured with same SSID, channel width, AirMax and WDS are enabled; I have tried DFS and the 5735-5840 frequencies and still can't make them associate each other. Am I missing something? ----- Original Message ----- From: Chris Ruschmann <mailto:[email protected]> To: Ubiquiti Users Group <mailto:[email protected]> Sent: Wednesday, November 26, 2014 7:49 PM Subject: Re: [Ubnt_users] Quick question on XM & XW firmwares You can associate an XM with an XW and vice versa. I have this setup all over my network. What you can’t do is associate an XW nano beam with an XM or XW UBNT device in the DFS Range as nano beams don’t support DFS, but legacy gear does. From: [email protected] [mailto:[email protected]] On Behalf Of Eduardo Sent: Wednesday, November 26, 2014 3:11 PM To: Ubiquiti Users Group Subject: [Ubnt_users] Quick question on XM & XW firmwares I have a NSlocoM5 with XW firmware and need it to associate with an NSM5-AP that has XM firmware. Has someone ever tried to change a XW firmware for a XM firmware in a NSlocoM5? Eduardo ________________________________ _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
