Do a site survey. See if 5.3 frequencies are listed. If not, and unii2 is enabled, reboot.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 1, 2014 10:22 PM, "Jason Bailey" <j284...@yahoo.com> wrote: > Were you sure DFS was enabled on that radio prior to the upgrade? > Downgrade to 5.5.8 and see if there is a enable uni-2 checkbox on the > system tab. If thats not checked prior to upgrade,it won't do lower > frequencies. > > > On Monday, December 1, 2014 9:57 PM, Kees H <wi...@calbroadband.com> > wrote: > > > Any reason, I can't seem to hard code 5300DFS in a RM5 v.5.5.10? > (Actually several of the upper channel DFS) > It goes to another frequency set in the frequency list. If I disable the > frequency list, it still goes to another frequency. > > Now the RM5 in question is a backup AP ptp link and is not connected at > this time. > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
