what are your channel size? I saw this with 40 meg channels It would not let a DFS and non-DFS overlap
From: Josh Luthman Sent: Monday, December 01, 2014 7:38 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] RM5 V5.5.10 Do a site survey. See if 5.3 frequencies are listed. If not, and unii2 is enabled, reboot. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 1, 2014 10:22 PM, "Jason Bailey" <j284...@yahoo.com> wrote: Were you sure DFS was enabled on that radio prior to the upgrade? Downgrade to 5.5.8 and see if there is a enable uni-2 checkbox on the system tab. If thats not checked prior to upgrade,it won't do lower frequencies. On Monday, December 1, 2014 9:57 PM, Kees H <wi...@calbroadband.com> wrote: Any reason, I can't seem to hard code 5300DFS in a RM5 v.5.5.10? (Actually several of the upper channel DFS) It goes to another frequency set in the frequency list. If I disable the frequency list, it still goes to another frequency. Now the RM5 in question is a backup AP ptp link and is not connected at this time. _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -------------------------------------------------------------------------------- _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
