I'm remote logging into Splunk. On AirMax M radios, it seemed to be using the timestamp from the device.
On Tue, Jul 12, 2016 at 1:44 PM, Jesse DuPont <[email protected] > wrote: > Do you log to a remote syslog server or just the local syslog? I use a > remote syslog server and it has it's own date/time stamp on the log entries > it applies as it receives them. Obviously I'll only see log entries if the > radios are linked (if the link is required to reach the remote syslog > server). This way, I can sort by the syslog server's time stamp and at > least have solid order of events to look at. > > *Jesse DuPont* > > Network Architect > email: [email protected] > Celerity Networks LLC > > Celerity Broadband LLC > Like us! facebook.com/celeritynetworksllc > > Like us! facebook.com/celeritybroadband > On 7/12/16 9:22 AM, Ridgetop Networks wrote: > > I noticed my UBNT radios didn't seem to know about DST, and it was making > it hard to find things in syslog, so now I've got all my devices set to > GMT. Is there a better way? > > On Mon, Jul 11, 2016 at 3:50 PM, Jon Auer <[email protected]> wrote: > >> 0.ubnt.pool.ntp.org should work, but it's not one consistent host. >> There's a chance that the host you are given could be down (there's a small >> amount of time between health checks and servers being pulled from the >> pool). >> The addresses returned by N.vendor.pool.ntp.org vary for load balancing. >> You might get a different host every time you make a DNS query. >> >> If you have your own stratum 1 or stratum 2 server you should look at >> contributing to the NTP pool: http://www.pool.ntp.org/en/ >> We have a GPS-based stratum 1 feeding some stratum 2 servers that >> participate in the pool. Traffic is minimal. >> >> We switched to a purpose-built NTP appliance combined with a stratum-2 >> cluster after we noticed that the time from LMG CTMs and Cambium CMMs was >> somewhat inconsistent. >> At least on the LMG side we were told that their NTP was intended only >> for rough tower-local NTP services (we saw +/- 5 second variance). >> >> We're currently using the $300 TM1000A (make sure you are on latest >> firmware) for stratum 1. >> >> >> On Mon, Jul 11, 2016 at 12:28 PM, Steve Barnes <[email protected]> wrote: >> >>> Is 0.ubnt.pool.ntp.org set right and working. I have lots of stuff >>> pointed to that and its off an hour at least. Time zone set correctly but >>> still off an hour. >>> >>> >>> Steve Barnes >>> Wireless Operations Manager >>> PCSWIN.COM >>> NLBC.COM >>> >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >> >> _______________________________________________ >> Ubnt_users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > > > -- > Andrew Kaiser > Ridgetop Networks, LLC > 417-543-5513 > www.ridgetopnetworks.com > > > _______________________________________________ > Ubnt_users mailing > [email protected]http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- Andrew Kaiser Ridgetop Networks, LLC 417-543-5513 www.ridgetopnetworks.com
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
