I use the feed horns as well, they work great up close, but as you get farther out, more than a mile, they start to have issues I've found.
How far are you connecting you're your devices at? -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of G. Nicholas Sent: Monday, September 26, 2016 7:29 PM To: Ubiquiti Users Group <[email protected]> Subject: Re: [Ubnt_users] R5AC-PRISM-US Evan, Yes you have the correct pairing, we just converted a tower site from 4 Prism's on the UB Titanium sectors to the RF Elements 30deg horns. Greatly reduced the noise floor by going to the 30deg which gave us higher SNR and more 8x rates. doing an ABC channel config until UB actually gets the GPS sync on the Prisms working. Total capacity on the tower now is over 2 GBps. Garth ----- Original Message ----- From: Evan Galvin Sent: 9/26/2016 7:42:35 PM To: [email protected] Subject: [Ubnt_users] R5AC-PRISM-US > Hey guys, just wanted to confirm that the R5AC-PRISM-US has a metal > shielded housing on it. > > Do you think it would pair up good with this combo: > > https://www.streakwave.com/Itemdesc.aspb _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
