I do have this issue on several ptmp connections using the latest beta firmware. I figured it was a bug. What firmware are you running?
On Oct 6, 2016 1:39 PM, "Phil Curnutt" <pcurn...@gmail.com> wrote: > I had a short back bone link from one small AP to another so used a pair > of NBE-5AC-19's expecting an Rx of around -55. After connecting the link > the best we could get was a -66 on Chain0 and a -77 on Chain1 when the > radios were at the proper tilt and azimuth. With help from the Alignment > Tool we got it down to a -60/-70, but AP end of the link was aimed about 5 > degree down rather then 1 degree up. We could achieve the same Chain0, > Chain1 imbalance the other way with the AP aimed 1 degree up and the > Station aimed 6 degrees down. I replace the Station end with a PBE-5AC-300 > and dropped the Chain0/Chain1 signals to -60/-70, but no better. So, today > I replace the AP end with another 300 and the signal dropped to -47/-47. > > So, the question is has anyone else seen this behavior in the NanoBeam? > We have a bunch of them in use on PtMP AP's using sectors and they work > just as expected, but when used as PtP this weird astigmatism shows up. > > Phil > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
