I had pretty much the same situation with 5.5.9. Change the hardware but still get the latest firmware.
Rory -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, November 7, 2016 11:03 AM To: [email protected] Subject: [Ubnt_users] Backhaul Radios freeze on Station side I have had 3 towers in the past week have the Station side of the Backhaul link lock up and not transfer service to the tower until rebooted, but each stayed connected to the AP side of the Backhaul connection. In all 3 cases, I was able to log into both the AP and Station side of the backhaul link to reboot the station remotely. Once rebooted every CPE came back online. These radios have been in operation for months and zero issues. The details are below for the setup and firmware. The radio's are M series Rocket radios. Tower 1: M5 5.6.4 XW to M5 5.6.4 XW Tower 2: M365 5.6.4 XM to M365 5.6.4 XM Tower 3: PBE M5 5.6.6 XW to M5 5.6.6 XM I have not seen this occur previously and wondered if it was a firmware issue. Also, I am not using any DFS channels for either tower. Any ideas or areas to monitor is appreciated. Troy _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
