Clay that is exactly what is happening. Issue is weather is incredible for October and November as well as these are long standing connections and not new crimps. Simple reboot remotely through Air Control or directly connected to station side restores connection. I was reviewing beta firmware, but unsure if it would fix this issue. Thanks, Troy
Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Clay Stewart <[email protected]> Date: 11/8/16 12:29 PM (GMT-05:00) To: Ubiquiti Users Group <[email protected]> Subject: Re: [Ubnt_users] Backhaul Radios freeze on Station side If you saying stopped passing traffic on Lan side, but remained powered and connected to AP, I would suspect a bad crimper and cold weather. On Nov 7, 2016 1:04 PM, <[email protected]> wrote: I have had 3 towers in the past week have the Station side of the Backhaul link lock up and not transfer service to the tower until rebooted, but each stayed connected to the AP side of the Backhaul connection. In all 3 cases, I was able to log into both the AP and Station side of the backhaul link to reboot the station remotely. Once rebooted every CPE came back online. These radios have been in operation for months and zero issues. The details are below for the setup and firmware. The radio's are M series Rocket radios. Tower 1: M5 5.6.4 XW to M5 5.6.4 XW Tower 2: M365 5.6.4 XM to M365 5.6.4 XM Tower 3: PBE M5 5.6.6 XW to M5 5.6.6 XM I have not seen this occur previously and wondered if it was a firmware issue. Also, I am not using any DFS channels for either tower. Any ideas or areas to monitor is appreciated. Troy _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
