If you saying stopped passing traffic on Lan side, but remained powered and
connected to AP, I would suspect a bad crimper and cold weather.

On Nov 7, 2016 1:04 PM, <t...@byhalia.net> wrote:

> I have had 3 towers in the past week have the Station side of the Backhaul
> link lock up and not transfer service to the tower until rebooted, but
> each stayed connected to the AP side of the Backhaul connection.  In all 3
> cases, I was able to log into both the AP and Station side of the backhaul
> link to reboot the station remotely.  Once rebooted every CPE came back
> online.
>
> These radios have been in operation for months and zero issues.  The
> details are below for the setup and firmware.
>
> The radio's are M series Rocket radios.
>
> Tower 1:  M5 5.6.4 XW to M5 5.6.4 XW
>
> Tower 2:  M365 5.6.4 XM to M365 5.6.4 XM
>
> Tower 3:  PBE M5 5.6.6 XW to M5 5.6.6 XM
>
> I have not seen this occur previously and wondered if it was a firmware
> issue.  Also, I am not using any DFS channels for either tower.  Any ideas
> or areas to monitor is appreciated.
>
> Troy
>
> _______________________________________________
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to