As I said in the first post, I did have them setup on the bench and was passing the advertised 1.2g through the link (with a big smile on my bosses face.)
On Jul 7, 2017 6:25 PM, "Jeremy Smith" <jsm...@bluespring.me> wrote: > Just read it again, and now I see where I was confused. That seems > correct. As long as the TX and RX are set correctly, per your license they > should work. Did you link them on the bench first? The will link around > -55/-58 if you place the N-connectors around 1" apart from each other. > > ------------------------------ > *From: *"Ethan E. Dee" <e...@globalvision.net> > *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org> > *Sent: *Friday, July 7, 2017 2:33:29 PM > *Subject: *Re: [Ubnt_users] AirFiber 11FX - No Wireless Connection > > Just a thought, and I have no experience with the AF11x. > Once I had two AF24's that wouldn't link. It was because the tx was on the > same frequency on both and the rx was the same frequency on both and they > had to be flip flopped. We spent alot of money trying other equipment > thinking ours was just bad and turned out to be that simple. > Just thought I'd throw it out there. > > On 07/07/2017 04:18 PM, Joey Craig wrote: > > Before I contact UBNT support, I thought I would try here first. I have > had t our tower climbers here twice to install and aim these. Very > frustrated. Maybe someone else has had this issue. > > Had a Nera 11GHz radio struck by lightning last December and replacement > parts were no longer available. The head of the company decided to try the > New AF11FX link. > > For some reason, we are not able to get them to connect to each other when > on the towers, but I did have them wireless connected and passing the > maximum throughput on the bench without any issues. > > We have a good tower crew so I do believe them that they tried everything. > Myself and another tech from the company were on each end at the time and > did not see any change in rssi during the aiming process. > > We do have a backup link using the AF5X radios with the 34dB/4ft antennas > which are mounted 10 ft under the 11GHz link at each end so we do have a > reputable point of reference to aim the new dishes. > > I just logged into each end and used the Airview program on the AF11FX > radios and I am not showing any frequency usage at all and the noise level > at each end is running at -92 as seen in the dashboard and corresponding > with the Airview. > > We are using the high-band radios with the Jirous-1200-10/11 antennas and > the adapter radio mounting plates. I have verified the duplexers are the > opposite on each end as the instructions specify. (radio #1 2/4-4/2 and > radios #2 4/2-2/4). The TX and RX frequencies are opposite on both ends of > the link. > > I have the cfg and sup files from both radios if anyone would care to look > at them. > > It just appears that neither of the radios are transmitting once mounted > on the towers. > > -- > Joey Craig > *Network/RF Engineer* > *Firenet1.Com <http://www.firenet1.com/>* > *Phone: (662) 510-0764 <(662)%20510-0764>* > *Mobile: (662) 404-1118 <(662)%20404-1118>* > > > > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> > Virus-free. > www.avg.com > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> > > > _______________________________________________ > Ubnt_users mailing > listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users > > > -- > Ethan Dee > Network Admin > Globalvision > 864 704 3600 <(864)%20704-3600> > e...@globalvision.net > > For Support: > gv-supp...@globalvision.net > 864 467 1333 <(864)%20467-1333> > > For Sales: > sa...@globalvision.net > 864 467 1333 <(864)%20467-1333> > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
