That's ok. It's friday. On Jul 7, 2017 8:38 PM, "Jeremy Smith" <jsm...@bluespring.me> wrote:
> I really need to work on my reading comprehension.... > > ------------------------------ > *From: *"Joey Craig" <joey.cr...@firenet1.com> > *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org> > *Sent: *Friday, July 7, 2017 5:30:38 PM > *Subject: *Re: [Ubnt_users] AirFiber 11FX - No Wireless Connection > > As I said in the first post, I did have them setup on the bench and was > passing the advertised 1.2g through the link (with a big smile on my bosses > face.) > > On Jul 7, 2017 6:25 PM, "Jeremy Smith" <jsm...@bluespring.me> wrote: > >> Just read it again, and now I see where I was confused. That seems >> correct. As long as the TX and RX are set correctly, per your license they >> should work. Did you link them on the bench first? The will link around >> -55/-58 if you place the N-connectors around 1" apart from each other. >> >> ------------------------------ >> *From: *"Ethan E. Dee" <e...@globalvision.net> >> *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org> >> *Sent: *Friday, July 7, 2017 2:33:29 PM >> *Subject: *Re: [Ubnt_users] AirFiber 11FX - No Wireless Connection >> >> Just a thought, and I have no experience with the AF11x. >> Once I had two AF24's that wouldn't link. It was because the tx was on >> the same frequency on both and the rx was the same frequency on both and >> they had to be flip flopped. We spent alot of money trying other equipment >> thinking ours was just bad and turned out to be that simple. >> Just thought I'd throw it out there. >> >> On 07/07/2017 04:18 PM, Joey Craig wrote: >> >> Before I contact UBNT support, I thought I would try here first. I have >> had t our tower climbers here twice to install and aim these. Very >> frustrated. Maybe someone else has had this issue. >> >> Had a Nera 11GHz radio struck by lightning last December and replacement >> parts were no longer available. The head of the company decided to try the >> New AF11FX link. >> >> For some reason, we are not able to get them to connect to each other >> when on the towers, but I did have them wireless connected and passing the >> maximum throughput on the bench without any issues. >> >> We have a good tower crew so I do believe them that they tried >> everything. Myself and another tech from the company were on each end at >> the time and did not see any change in rssi during the aiming process. >> >> We do have a backup link using the AF5X radios with the 34dB/4ft antennas >> which are mounted 10 ft under the 11GHz link at each end so we do have a >> reputable point of reference to aim the new dishes. >> >> I just logged into each end and used the Airview program on the AF11FX >> radios and I am not showing any frequency usage at all and the noise level >> at each end is running at -92 as seen in the dashboard and corresponding >> with the Airview. >> >> We are using the high-band radios with the Jirous-1200-10/11 antennas and >> the adapter radio mounting plates. I have verified the duplexers are the >> opposite on each end as the instructions specify. (radio #1 2/4-4/2 and >> radios #2 4/2-2/4). The TX and RX frequencies are opposite on both ends of >> the link. >> >> I have the cfg and sup files from both radios if anyone would care to >> look at them. >> >> It just appears that neither of the radios are transmitting once mounted >> on the towers. >> >> -- >> Joey Craig >> *Network/RF Engineer* >> *Firenet1.Com <http://www.firenet1.com/>* >> *Phone: (662) 510-0764 <(662)%20510-0764>* >> *Mobile: (662) 404-1118 <(662)%20404-1118>* >> >> >> >> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> >> Virus-free. >> www.avg.com >> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> >> >> >> _______________________________________________ >> Ubnt_users mailing >> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> -- >> Ethan Dee >> Network Admin >> Globalvision >> 864 704 3600 <(864)%20704-3600> >> e...@globalvision.net >> >> For Support: >> gv-supp...@globalvision.net >> 864 467 1333 <(864)%20467-1333> >> >> For Sales: >> sa...@globalvision.net >> 864 467 1333 <(864)%20467-1333> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users