Beta 6 or 7 still does not find 6.0.4.  I have had to go through my system to 
find missing CPE's or APs that were on 6.0.4  Downgraded to 5.6.15 for them to 
be found as I was unsure of the higher 6.0 firmware at the time.


Troy Gibson
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: RickG <[email protected]> Date: 
11/17/17  4:51 AM  (GMT-05:00) To: Ubiquiti Users Group <[email protected]> 
Subject: Re: [Ubnt_users] aircontrol won't find 6.0.4 devices 
The beta works better.
On Thu, Nov 16, 2017 at 1:48 PM, Phil Curnutt <[email protected]> wrote:
AirControl2 2.0.3 is found on Ubnt.com, Support>Downloads>AirMax>Utilities.  
Your have choices of Linux or Windows10 Servers and Clients and Mac Clients.  I 
found our 900 radios on 5.6.9, but not the one on 6.0.4, but I was able to add 
the device manually using v 2.0.2.
Phil
On Thu, Nov 16, 2017 at 11:18 AM, Jan Van Kort <[email protected]> 
wrote:

  
    
  
  
    I had an earlier version of air control installed and gave up
      trying to make it work over 2 years ago.  Where do i go to get a
      current version of air control so I can try it again?  I'm
      wandering around the ubnt.com website and can't find it.  Does the
      current version have the 6.04 issue?

    
    

    On 08/31/2017 11:05 AM, James Craig via
      Ubnt_users wrote:

    
    
      Hi Guys,
        

        
        This is most likely due to this change in discovery in
          6.0.4.  We're adding CGN address space in 6.0.7, so moving
          forward, you will only be able to discover from RFC1918 and
          RFC6598 address. IP range scanning should still work.
        

        
        
          - Fix: Limit discovery response to queries from private subnets or 
multicast/broadcast
        
      
      

        On Thu, Aug 31, 2017 at 1:58 PM, Troy
          Gibson, Byhalia.net,LLC <[email protected]>
          wrote:

          
            
              I'm on AC2.1 beta 7 and it won't find any 6.0.4
                radios, XW or XM.  I had some being monitored on beta 6,
                so those are still monitored, but show in devices not
                found column of discovery.  TCP scan only showed prism
                radios too.
              

              
              I downgraded to 5.6.15 and it was discovered.  I had
                to downgrade AP and CPE for it to discover the devices
                on AC. Now to search for the missing radios!!
              

              
              

              
              Troy
              

              
              

              
              

              
              

              
              

              
              
                Sent
                  from my Verizon, Samsung Galaxy smartphone
              
              
                

                
                
                  -------- Original message --------
                  From: CBB - Jay Fuller <[email protected]>
                  
                  Date: 8/31/17 1:25 PM (GMT-05:00) 
                  To: Ubiquiti Users Group <[email protected]>
                  
                  Subject: [Ubnt_users] aircontrol won't find 6.0.4
                    devices 
                  

                  
                
                 
                Been reading all about it in the
                    ubnt forums - but anyone have any suggestions around
                    this?
                 
                Thought I'd post it here too - 
                 
                Haven't run aircontrol since
                    about 18 months ago.  About nine months ago I
                    attempted to upgrade to the then current beta but it
                    basically corrupted my database and would not even
                    start the server service.  Last night late I started
                    over again from scratch.  Ran into the 6.0.4 problem
                    as one of my network segments (from a recent
                    purchase) we have manually changed the ip addresses
                    and put them all on 6.0.4
                 
                
                  

                    A different segment is still running 5.6.3.  I was
                    planning to move them all to 6.0.4 and also make a
                    mass change of the username / password.
                   
                   
                   
                  Left discovering overnight, found all the devices
                    on 5.6.3 on that particular network segment but did
                    not find any 6.0.4
                   
                   
                   
                  Today once googling and discovering this issue I
                    downgraded an AP from 6.0.4 to 5.6.3 and discovery
                    found it immediately.
                   
                   
                   
                  I don't want to do this to 300 devices.
                   
                   
                   
                  Aircontrol v.2.0.2.2874.170719.18353 is running
                    on a public IP within our network.
                   
                   
                   
                  I tried to new feature tcp scan but no luck
                    (probably because the server is in public ip space).
                   
                  

                    I thought about temporarily changing the IP but then
                    radios would be reporting to the wrong IP.
                   
                   
                   
                  I can manually add the device but have not found
                    a way to do that in bulk.
                   
                   
                   
                  I don't know if it is easier for me to upgrade to
                    something higher than 6.0.4 on all of my devices and
                    use discovery or to manually add 300+ devices.  I am
                    hoping for another option.
                   
                   
                   
                  Bueller?  Bueller?
                   
                   
                   
                
                Thanks 
              
            

            _______________________________________________

            Ubnt_users mailing list

            [email protected]

            http://lists.wispa.org/mailman/listinfo/ubnt_users

            

          
        
        

      
      

      
      

      _______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

    
    

  


_______________________________________________

Ubnt_users mailing list

[email protected]

http://lists.wispa.org/mailman/listinfo/ubnt_users





_______________________________________________

Ubnt_users mailing list

[email protected]

http://lists.wispa.org/mailman/listinfo/ubnt_users





-- 
-RickG

_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to