Well for us it is because we are elevating our units. I also hate the locked firmware at and after 6.0.6
On Fri, Nov 17, 2017 at 10:21 AM, Rory Conaway <[email protected]> wrote: > Why are you still running 6.0.4? > > > > Rory > > > > *From:* [email protected] [mailto:[email protected]] > *On Behalf Of *Troy Gibson, Byhalia.net,LLC > *Sent:* Friday, November 17, 2017 5:31 AM > > *To:* Ubiquiti Users Group <[email protected]> > *Subject:* Re: [Ubnt_users] aircontrol won't find 6.0.4 devices > > > > Beta 6 or 7 still does not find 6.0.4. I have had to go through my system > to find missing CPE's or APs that were on 6.0.4 Downgraded to 5.6.15 for > them to be found as I was unsure of the higher 6.0 firmware at the time. > > > > > > > > Troy Gibson > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > > -------- Original message -------- > > From: RickG <[email protected]> > > Date: 11/17/17 4:51 AM (GMT-05:00) > > To: Ubiquiti Users Group <[email protected]> > > Subject: Re: [Ubnt_users] aircontrol won't find 6.0.4 devices > > > > The beta works better. > > > > On Thu, Nov 16, 2017 at 1:48 PM, Phil Curnutt <[email protected]> wrote: > > AirControl2 2.0.3 is found on Ubnt.com, Support>Downloads>AirMax>Utilities. > Your have choices of Linux or Windows10 Servers and Clients and Mac > Clients. I found our 900 radios on 5.6.9, but not the one on 6.0.4, but I > was able to add the device manually using v 2.0.2. > > > > Phil > > > > On Thu, Nov 16, 2017 at 11:18 AM, Jan Van Kort <[email protected]> > wrote: > > I had an earlier version of air control installed and gave up trying to > make it work over 2 years ago. Where do i go to get a current version of > air control so I can try it again? I'm wandering around the ubnt.com > website and can't find it. Does the current version have the 6.04 issue? > > > > On 08/31/2017 11:05 AM, James Craig via Ubnt_users wrote: > > Hi Guys, > > > > This is most likely due to this change in discovery in 6.0.4. We're > adding CGN address space in 6.0.7, so moving forward, you will only be able > to discover from RFC1918 and RFC6598 address. IP range scanning should > still work. > > > > - Fix: Limit discovery response to queries from private subnets or > multicast/broadcast > > > > On Thu, Aug 31, 2017 at 1:58 PM, Troy Gibson, Byhalia.net,LLC < > [email protected]> wrote: > > I'm on AC2.1 beta 7 and it won't find any 6.0.4 radios, XW or XM. I had > some being monitored on beta 6, so those are still monitored, but show in > devices not found column of discovery. TCP scan only showed prism radios > too. > > > > I downgraded to 5.6.15 and it was discovered. I had to downgrade AP and > CPE for it to discover the devices on AC. Now to search for the missing > radios!! > > > > > > Troy > > > > > > > > > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > > -------- Original message -------- > > From: CBB - Jay Fuller <[email protected]> > > Date: 8/31/17 1:25 PM (GMT-05:00) > > To: Ubiquiti Users Group <[email protected]> > > Subject: [Ubnt_users] aircontrol won't find 6.0.4 devices > > > > > > Been reading all about it in the ubnt forums - but anyone have any > suggestions around this? > > > > Thought I'd post it here too - > > > > Haven't run aircontrol since about 18 months ago. About nine months ago I > attempted to upgrade to the then current beta but it basically corrupted my > database and would not even start the server service. Last night late I > started over again from scratch. Ran into the 6.0.4 problem as one of my > network segments (from a recent purchase) we have manually changed the ip > addresses and put them all on 6.0.4 > > > > > A different segment is still running 5.6.3. I was planning to move them > all to 6.0.4 and also make a mass change of the username / password. > > > > > > > > Left discovering overnight, found all the devices on 5.6.3 on that > particular network segment but did not find any 6.0.4 > > > > > > > > Today once googling and discovering this issue I downgraded an AP from > 6.0.4 to 5.6.3 and discovery found it immediately. > > > > > > > > I don't want to do this to 300 devices. > > > > > > > > Aircontrol v.2.0.2.2874.170719.18353 is running on a public IP within our > network. > > > > > > > > I tried to new feature tcp scan but no luck (probably because the server > is in public ip space). > > > > > I thought about temporarily changing the IP but then radios would be > reporting to the wrong IP. > > > > > > > > I can manually add the device but have not found a way to do that in bulk. > > > > > > > > I don't know if it is easier for me to upgrade to something higher than > 6.0.4 on all of my devices and use discovery or to manually add 300+ > devices. I am hoping for another option. > > > > > > > > Bueller? Bueller? > > > > > > > > Thanks > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > _______________________________________________ > > Ubnt_users mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > -- > > -RickG > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- David Jones NGL Connection 307-288-5491 ext 702
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
