So, Set at your gnome-ppp ttyACM0 as your modem and set speed as 460k and at Init string add the 3rd Init string as AT+CGDCONT=1,,"gpinternet"
at teh dialer prompt use phonenumber as *99# or *99***# or *99***1# use username as x and also password as x This should work just fine. You didn't paste the content of /etc/wvdial.conf see my tutorial at that page.... replace the modem name as ttyACM0 and other things will be almost same. :) Good Luck On Mon, Nov 17, 2008 at 3:38 AM, Darklord2007 <[EMAIL PROTECTED]>wrote: > Attached output. Just deleted prev conf this is new 1 > [EMAIL PROTECTED]:~# sudo wvdialconf > Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > Modem Port Scan<*1>: S2 S3 > WvModem<*1>: Cannot get information for serial port. > ttyACM0<*1>: ATQ0 V1 E1 -- OK > ttyACM0<*1>: ATQ0 V1 E1 Z -- OK > ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttyACM0<*1>: Modem Identifier: ATI -- Nokia > ttyACM0<*1>: Speed 4800: AT -- OK > ttyACM0<*1>: Speed 9600: AT -- OK > ttyACM0<*1>: Speed 19200: AT -- OK > ttyACM0<*1>: Speed 38400: AT -- OK > ttyACM0<*1>: Speed 57600: AT -- OK > ttyACM0<*1>: Speed 115200: AT -- OK > ttyACM0<*1>: Speed 230400: AT -- OK > ttyACM0<*1>: Speed 460800: AT -- OK > ttyACM0<*1>: Max speed is 460800; that should be safe. > ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > > Found an USB modem on /dev/ttyACM0. > /etc/wvdial.conf<Warn>: Can't open '/etc/wvdial.conf' for reading: No such > file or directory > /etc/wvdial.conf<Warn>: ...starting with blank configuration. > Modem configuration written to /etc/wvdial.conf. > ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > > -- > ubuntu-bd mailing list > [email protected] > https://lists.ubuntu.com/mailman/listinfo/ubuntu-bd > > -- ------------------------------------------------------------------------- Use FreeOpenSourceSoftwares, Stop piracy, Let the developers live. Get a Free CD of Ubuntu mailed to your door without any cost. Visit : www.ubuntu.com ------------------------------------------------------------------------- -- ubuntu-bd mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bd
