Still got problem when tried to connect always shows sending password i saw the log it says Please enter password(or empty password to stop)
1mor thing when ever i cancel connecting and try to reconnect it says cannot open modem. Then i try to detect modem again says no modem was found on your system. So i plug out and plug in usb again then it detect modem but device changd to ttyACM0 TO ACM1,2,3,4 (I TRIED 4 TIMES) On 11/16/08, 9el <[EMAIL PROTECTED]> wrote: > So, > Set at your gnome-ppp > ttyACM0 as your modem > and > set speed as 460k > and at Init string add the 3rd Init string as AT+CGDCONT=1,,"gpinternet" > > at teh dialer prompt use phonenumber as *99# or *99***# or *99***1# > use username as x and also password as x > > This should work just fine. > > You didn't paste the content of /etc/wvdial.conf > > see my tutorial at that page.... replace the modem name as ttyACM0 and > other things will be almost same. :) > > Good Luck > > On Mon, Nov 17, 2008 at 3:38 AM, Darklord2007 <[EMAIL PROTECTED]>wrote: > >> Attached output. Just deleted prev conf this is new 1 >> [EMAIL PROTECTED]:~# sudo wvdialconf >> Editing `/etc/wvdial.conf'. >> >> Scanning your serial ports for a modem. >> >> ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >> ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >> ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >> ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >> ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >> ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >> Modem Port Scan<*1>: S2 S3 >> WvModem<*1>: Cannot get information for serial port. >> ttyACM0<*1>: ATQ0 V1 E1 -- OK >> ttyACM0<*1>: ATQ0 V1 E1 Z -- OK >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >> ttyACM0<*1>: Modem Identifier: ATI -- Nokia >> ttyACM0<*1>: Speed 4800: AT -- OK >> ttyACM0<*1>: Speed 9600: AT -- OK >> ttyACM0<*1>: Speed 19200: AT -- OK >> ttyACM0<*1>: Speed 38400: AT -- OK >> ttyACM0<*1>: Speed 57600: AT -- OK >> ttyACM0<*1>: Speed 115200: AT -- OK >> ttyACM0<*1>: Speed 230400: AT -- OK >> ttyACM0<*1>: Speed 460800: AT -- OK >> ttyACM0<*1>: Max speed is 460800; that should be safe. >> ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >> >> Found an USB modem on /dev/ttyACM0. >> /etc/wvdial.conf<Warn>: Can't open '/etc/wvdial.conf' for reading: No such >> file or directory >> /etc/wvdial.conf<Warn>: ...starting with blank configuration. >> Modem configuration written to /etc/wvdial.conf. >> ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" >> >> >> -- >> ubuntu-bd mailing list >> [email protected] >> https://lists.ubuntu.com/mailman/listinfo/ubuntu-bd >> >> > > > -- > ------------------------------------------------------------------------- > Use FreeOpenSourceSoftwares, Stop piracy, Let the developers live. Get > a Free CD of Ubuntu mailed to your door without any cost. Visit : > www.ubuntu.com > ------------------------------------------------------------------------- > -- > ubuntu-bd mailing list > [email protected] > https://lists.ubuntu.com/mailman/listinfo/ubuntu-bd > -- DARKLORD (:= -- ubuntu-bd mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bd
