On 3/16/09, Mehul Ved <[email protected]> wrote:
> > 1. My internet connection is WLL, which is provided by VSNL. Kindly guide
> me
> > as to how to configure my Ubuntu (version 7.10, Gutsy) so that I can get
> on
> > line. Is any special software needed? The connection is via USB port.
>
> Try http://www.thinkdigit.com/forum/showthread.php?p=876989
I have gotten one step further. According to what I found in the terminal
window output, I changed the modem's address from "ttyACMO" to "ttySLO". I
went back to the wvdial.conf file and changed the modem's address there. Now
when I go into a terminal window and type "wvdial", it recognizes the modem
and tries to go online.
There are three initialization strings. The third one is specific to the LG
LST-260B modem. The first two initialization strings work fine. But the
third one--which is specific for the LG LST-260B and which I got from the
above "How-To", is not working. Here is what the terminal output looks like:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: at+crm=1;at$lgpkt=3
at+crm=1;at$lgpkt=3
ERROR
Bad init string.
So it looks like that final initialization string (at+crm=1;at$lgpkt=3) is
not correct. Although that is the very string given in the tutorial. ("The
initialization command for LG CDMA LST-260B is *at+crm=1;at$lgpkt=3*").
So it seems I am just at the final step. If I can provide the correct
initialization string, it should accept it and connect, go on line.
If anyone can help me in this final step, it will be great.
Thanks so much,
Suranjan
--
ubuntu-in mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-in
