hi, 1.. i m having problems with garbage display during start up that doesnt enable me to see login screen.. i hv to boot several times jz to get to the login screen.. i'm using acer travelmate 6291 notebook with built in integrated intel graphic chipset..
2. is there any simple way to use and get connected to internet juz by clicking on an icon? i hv bandluxe c120 usb broadband.. recently i hv to run "sudo /etc/init.d/hal stop" plug in the device then "wvdialconf" then "sudo wvdial" .. i hv to run wvdialconf without sudo coz if i do it with sudo, it will change config to the wvdial.conf with 9000bps.. my /etc/wvdial.conf configuration: Baud = 7200000 Modem = /dev/ttyUSB1 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Phone = *99# Username = mypassword Password = mypassword Ask Password = 0 Dial Command = ATDT Stupid Mode = 0 Idle Seconds = 3000 ISDN = 0 Auto DNS = 1 3. and also if forgot to run "sudo /etc/init.d/hal start b4 logging out, my log in screen would become "garbage screen" again.. ok that's it... garbage screen and need a simple step to surf the internet... thanks for any help... :) and so sorry 4 my poor english hehe --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ubuntu Linux" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/ubuntulinux?hl=en -~----------~----~----~----~------~----~------~--~---
