Vikas TM wrote: > Hi Carmelo, > > --with-logfile="/dev/null" > configure: WARNING: If you wanted to set the --build type, don't use --host. > If a cross compiler is detected then cross compile mode will be used. > I suspect your cross-compiler is not really cross; you need to configure it for the correct target, likely you exchanged --host with --target. Check you configuration running powerpc-linux-uclibc-gcc -v. For example, my cross sh4 gcc is configured with: --host=i686-pc-linux-gnu --target=sh4-linux-uclibc
plus other configurations on directories, sysroot Not really a uclibc issue, instead a gcc/buildroot problem. So you should ask support to buildroot list, or review your toolchain configuration. > checking what to build and install... agent mibs > using default "enterprise.net-snmp" > using default enterprise sysOID "NET-SNMP-MIB::netSnmpAgentOIDs..." > using default notifications "NET-SNMP-MIB::netSnmpNotifications" > checking if I need to feed myself to ksh... no > checking for powerpc-linux-gcc... powerpc-linux-uclibc-gcc > checking for C compiler default output file name... configure: error: > C compiler cannot create executables > clearly a mis-configured gcc issue > See `config.log' for more details. > did you look at it? > make: *** [net-snmp-5.1/.configured] Error 77 > > Can you please provide solution for this error. > > Thanks > Vikas TM > > > Regards, Carmelo > On 11/19/07, Carmelo AMOROSO <[EMAIL PROTECTED]> wrote: > >> Vikas TM wrote: >> >>> Thanks Carmelo, >>> >>> Previously i made these changes what you mentioned now. still i am >>> unable to compile & ld. can you please specify what are the changes >>> required in the Makefile with an example Makefile.. >>> >>> >> really none. Why don't you post the error log .. likely some one could >> give you an hint. >> Carmelo >> >>> Thanks >>> Vikas TM >>> On 11/19/07, Carmelo AMOROSO <[EMAIL PROTECTED]> wrote: >>> >>> >>>> Carmelo AMOROSO wrote: >>>> >>>> >>>>> Vikas TM wrote: >>>>> >>>>> >>>>> >>>>>> Dear all, >>>>>> >>>>>> Please provide me nessessary changes required to migrate from glibc to >>>>>> uclibc (Ex: Makefile changes (busybox, utils,...etc) & config file >>>>>> changes). >>>>>> >>>>>> Thanks in advance >>>>>> - >>>>>> regards >>>>>> Vikas TM >>>>>> >>>>>> >>>>>> >>>>>> >>>>> Once you have your uClibc built and you cross compiler proper configured >>>>> for uClibc, >>>>> nothing special to do... just use the correct cross-compilation >>>>> environment, usually >>>>> you need to set accordingly CC and LD env variables. >>>>> >>>>> You may have some problems linking some applications is you same >>>>> functionalities >>>>> >>>>> >>>>> >>>> ... some applications if they use some functionalities that are not >>>> enabled .... >>>> >>>> Sorry, the sentenc was really not understandable. >>>> >>>> >>>>> are not enabled and/or implemented within uClibc (i.e. gettext functions >>>>> if you app >>>>> is localized, but in this case you colud link against libintl, onece you >>>>> have built it for uClibc). >>>>> >>>>> STLinux 2.3 distribution (www.stlinux.com) now provides a complete >>>>> distribution (almost 400 packages) >>>>> based on uClibc (nptl) for SH4. You may have a look to see the list of >>>>> packages released. >>>>> >>>>> Regards, >>>>> Carmelo >>>>> >>>>> >>>>> >>>>>> _______________________________________________ >>>>>> uClibc mailing list >>>>>> [email protected] >>>>>> http://busybox.net/cgi-bin/mailman/listinfo/uclibc >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> _______________________________________________ >>>>> uClibc mailing list >>>>> [email protected] >>>>> http://busybox.net/cgi-bin/mailman/listinfo/uclibc >>>>> >>>>> >>>>> >>>>> >>> >>> >> > > > _______________________________________________ uClibc mailing list [email protected] http://busybox.net/cgi-bin/mailman/listinfo/uclibc
