Dear all, facing error saying, cp /usr/slask/pwav/checkout/mcu/hcl/vikas/mcu/dropbear-0.44/scp /usr/slask/pwav/checkout/mcu/hcl/vikas/mcu/targfs/usr/bin powerpc-linux-uclibc-strip /usr/slask/pwav/checkout/mcu/hcl/vikas/mcu/targfs/usr/bin/dropbearmulti powerpc-linux-uclibc-strip: /usr/slask/pwav/checkout/mcu/hcl/vikas/mcu/targfs/usr/bin/dropbearmulti: File format not recognized make: *** [dropbear-inst] Error 1
Any one please provide solution for above problem. Thanks Vikas TM On 11/19/07, Vikas TM <[EMAIL PROTECTED]> wrote: > I Able overcome this error. thanks Carmelo for your support. > Carmelo, facing new error saying > > powerpc-linux-uclibc-strip targfs/allgon/swupdate > cp /usr/share/allgon/BINARIES/MCU_Frontboard/MCU_Frontboard_1.1.0.bin > targfs/usr/share/ > make: *** No rule to make target `dropbear', needed by `dropbear-inst'. Stop. > > Can you please provide solution for this error. > > thanks > Vikas TM > > On 11/19/07, Carmelo AMOROSO <[EMAIL PROTECTED]> wrote: > > Vikas TM wrote: > > > Hi Carmelo, > > > > > > --with-logfile="/dev/null" > > > configure: WARNING: If you wanted to set the --build type, don't use > > > --host. > > > If a cross compiler is detected then cross compile mode will be used. > > > > > I suspect your cross-compiler is not really cross; you need to configure > > it for the correct target, > > likely you exchanged --host with --target. > > Check you configuration running powerpc-linux-uclibc-gcc -v. > > For example, my cross sh4 gcc is configured with: > > --host=i686-pc-linux-gnu --target=sh4-linux-uclibc > > > > plus other configurations on directories, sysroot > > > > Not really a uclibc issue, instead a gcc/buildroot problem. > > So you should ask support to buildroot list, or review your toolchain > > configuration. > > > > > checking what to build and install... agent mibs > > > using default "enterprise.net-snmp" > > > using default enterprise sysOID "NET-SNMP-MIB::netSnmpAgentOIDs..." > > > using default notifications "NET-SNMP-MIB::netSnmpNotifications" > > > checking if I need to feed myself to ksh... no > > > checking for powerpc-linux-gcc... powerpc-linux-uclibc-gcc > > > checking for C compiler default output file name... configure: error: > > > C compiler cannot create executables > > > > > clearly a mis-configured gcc issue > > > See `config.log' for more details. > > > > > did you look at it? > > > make: *** [net-snmp-5.1/.configured] Error 77 > > > > > > Can you please provide solution for this error. > > > > > > Thanks > > > Vikas TM > > > > > > > > > > > Regards, > > Carmelo > > > On 11/19/07, Carmelo AMOROSO <[EMAIL PROTECTED]> wrote: > > > > > >> Vikas TM wrote: > > >> > > >>> Thanks Carmelo, > > >>> > > >>> Previously i made these changes what you mentioned now. still i am > > >>> unable to compile & ld. can you please specify what are the changes > > >>> required in the Makefile with an example Makefile.. > > >>> > > >>> > > >> really none. Why don't you post the error log .. likely some one could > > >> give you an hint. > > >> Carmelo > > >> > > >>> Thanks > > >>> Vikas TM > > >>> On 11/19/07, Carmelo AMOROSO <[EMAIL PROTECTED]> wrote: > > >>> > > >>> > > >>>> Carmelo AMOROSO wrote: > > >>>> > > >>>> > > >>>>> Vikas TM wrote: > > >>>>> > > >>>>> > > >>>>> > > >>>>>> Dear all, > > >>>>>> > > >>>>>> Please provide me nessessary changes required to migrate from glibc > > >>>>>> to > > >>>>>> uclibc (Ex: Makefile changes (busybox, utils,...etc) & config file > > >>>>>> changes). > > >>>>>> > > >>>>>> Thanks in advance > > >>>>>> - > > >>>>>> regards > > >>>>>> Vikas TM > > >>>>>> > > >>>>>> > > >>>>>> > > >>>>>> > > >>>>> Once you have your uClibc built and you cross compiler proper > > >>>>> configured > > >>>>> for uClibc, > > >>>>> nothing special to do... just use the correct cross-compilation > > >>>>> environment, usually > > >>>>> you need to set accordingly CC and LD env variables. > > >>>>> > > >>>>> You may have some problems linking some applications is you same > > >>>>> functionalities > > >>>>> > > >>>>> > > >>>>> > > >>>> ... some applications if they use some functionalities that are not > > >>>> enabled .... > > >>>> > > >>>> Sorry, the sentenc was really not understandable. > > >>>> > > >>>> > > >>>>> are not enabled and/or implemented within uClibc (i.e. gettext > > >>>>> functions > > >>>>> if you app > > >>>>> is localized, but in this case you colud link against libintl, onece > > >>>>> you > > >>>>> have built it for uClibc). > > >>>>> > > >>>>> STLinux 2.3 distribution (www.stlinux.com) now provides a complete > > >>>>> distribution (almost 400 packages) > > >>>>> based on uClibc (nptl) for SH4. You may have a look to see the list of > > >>>>> packages released. > > >>>>> > > >>>>> Regards, > > >>>>> Carmelo > > >>>>> > > >>>>> > > >>>>> > > >>>>>> _______________________________________________ > > >>>>>> uClibc mailing list > > >>>>>> [email protected] > > >>>>>> http://busybox.net/cgi-bin/mailman/listinfo/uclibc > > >>>>>> > > >>>>>> > > >>>>>> > > >>>>>> > > >>>>>> > > >>>>> _______________________________________________ > > >>>>> uClibc mailing list > > >>>>> [email protected] > > >>>>> http://busybox.net/cgi-bin/mailman/listinfo/uclibc > > >>>>> > > >>>>> > > >>>>> > > >>>>> > > >>> > > >>> > > >> > > > > > > > > > > > > > > > > -- > cheers & regards > Vikas TM > -- cheers & regards Vikas TM _______________________________________________ uClibc mailing list [email protected] http://busybox.net/cgi-bin/mailman/listinfo/uclibc
