I Able overcome this error. thanks Carmelo for your support. Carmelo, facing new error saying
powerpc-linux-uclibc-strip targfs/allgon/swupdate cp /usr/share/allgon/BINARIES/MCU_Frontboard/MCU_Frontboard_1.1.0.bin targfs/usr/share/ make: *** No rule to make target `dropbear', needed by `dropbear-inst'. Stop. Can you please provide solution for this error. thanks Vikas TM On 11/19/07, Carmelo AMOROSO <[EMAIL PROTECTED]> wrote: > Vikas TM wrote: > > Hi Carmelo, > > > > --with-logfile="/dev/null" > > configure: WARNING: If you wanted to set the --build type, don't use --host. > > If a cross compiler is detected then cross compile mode will be used. > > > I suspect your cross-compiler is not really cross; you need to configure > it for the correct target, > likely you exchanged --host with --target. > Check you configuration running powerpc-linux-uclibc-gcc -v. > For example, my cross sh4 gcc is configured with: > --host=i686-pc-linux-gnu --target=sh4-linux-uclibc > > plus other configurations on directories, sysroot > > Not really a uclibc issue, instead a gcc/buildroot problem. > So you should ask support to buildroot list, or review your toolchain > configuration. > > > checking what to build and install... agent mibs > > using default "enterprise.net-snmp" > > using default enterprise sysOID "NET-SNMP-MIB::netSnmpAgentOIDs..." > > using default notifications "NET-SNMP-MIB::netSnmpNotifications" > > checking if I need to feed myself to ksh... no > > checking for powerpc-linux-gcc... powerpc-linux-uclibc-gcc > > checking for C compiler default output file name... configure: error: > > C compiler cannot create executables > > > clearly a mis-configured gcc issue > > See `config.log' for more details. > > > did you look at it? > > make: *** [net-snmp-5.1/.configured] Error 77 > > > > Can you please provide solution for this error. > > > > Thanks > > Vikas TM > > > > > > > Regards, > Carmelo > > On 11/19/07, Carmelo AMOROSO <[EMAIL PROTECTED]> wrote: > > > >> Vikas TM wrote: > >> > >>> Thanks Carmelo, > >>> > >>> Previously i made these changes what you mentioned now. still i am > >>> unable to compile & ld. can you please specify what are the changes > >>> required in the Makefile with an example Makefile.. > >>> > >>> > >> really none. Why don't you post the error log .. likely some one could > >> give you an hint. > >> Carmelo > >> > >>> Thanks > >>> Vikas TM > >>> On 11/19/07, Carmelo AMOROSO <[EMAIL PROTECTED]> wrote: > >>> > >>> > >>>> Carmelo AMOROSO wrote: > >>>> > >>>> > >>>>> Vikas TM wrote: > >>>>> > >>>>> > >>>>> > >>>>>> Dear all, > >>>>>> > >>>>>> Please provide me nessessary changes required to migrate from glibc to > >>>>>> uclibc (Ex: Makefile changes (busybox, utils,...etc) & config file > >>>>>> changes). > >>>>>> > >>>>>> Thanks in advance > >>>>>> - > >>>>>> regards > >>>>>> Vikas TM > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>> Once you have your uClibc built and you cross compiler proper configured > >>>>> for uClibc, > >>>>> nothing special to do... just use the correct cross-compilation > >>>>> environment, usually > >>>>> you need to set accordingly CC and LD env variables. > >>>>> > >>>>> You may have some problems linking some applications is you same > >>>>> functionalities > >>>>> > >>>>> > >>>>> > >>>> ... some applications if they use some functionalities that are not > >>>> enabled .... > >>>> > >>>> Sorry, the sentenc was really not understandable. > >>>> > >>>> > >>>>> are not enabled and/or implemented within uClibc (i.e. gettext functions > >>>>> if you app > >>>>> is localized, but in this case you colud link against libintl, onece you > >>>>> have built it for uClibc). > >>>>> > >>>>> STLinux 2.3 distribution (www.stlinux.com) now provides a complete > >>>>> distribution (almost 400 packages) > >>>>> based on uClibc (nptl) for SH4. You may have a look to see the list of > >>>>> packages released. > >>>>> > >>>>> Regards, > >>>>> Carmelo > >>>>> > >>>>> > >>>>> > >>>>>> _______________________________________________ > >>>>>> uClibc mailing list > >>>>>> [email protected] > >>>>>> http://busybox.net/cgi-bin/mailman/listinfo/uclibc > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>> _______________________________________________ > >>>>> uClibc mailing list > >>>>> [email protected] > >>>>> http://busybox.net/cgi-bin/mailman/listinfo/uclibc > >>>>> > >>>>> > >>>>> > >>>>> > >>> > >>> > >> > > > > > > > > -- cheers & regards Vikas TM _______________________________________________ uClibc mailing list [email protected] http://busybox.net/cgi-bin/mailman/listinfo/uclibc
