Hi I have a odd problem with network on the IXDP425 with 2.6.x kernels, for 2.4 everything works ok. It may be I have missed a config setting or something obvious, but I'm stuck. I hope someone has a idea/tip.
My board has one i82557/i82558 10/100 Ethernet port(using eepro100 driver) as eth0. And one of the 425s npe port is connected to a regular ethernet port, while the other is connected to a 4 port switch. The eepro100 driver pass self tests and the Intel modules loads ok. Setting up the devices with ifconfig also gives no problems. Regardles of this, they simply does not work. But I don't see any error messages. Nothing works on the network, not even ping. Except ONE of the switch ports on the ixp0, this one works ok with every network service. I thought all ports on the switch was identicall, but the 3 others are as dead as the ixp1 and eth0 ports. Any ideas how to get them working? Regards Knut
_______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
