Hi Assaf, all I have tried different boards they are all the same, and if I go back to the old 2.4 based images they work. So I don't think it's a HW issue.
The rc I use are identical, so I think that part works ok. It behaves like it's not connected to the network, everything else looks ok. Regards Knut > From: Assaf Harel [EMAIL PROTECTED] > Sent: 2007-04-10 17:19:17 CEST > We're working with MonteJade boards here, and this looks like a HW > problem more then everything, so you might want to switch boards, and > see if it's persistent. Not avoiding the obvious let me snip the part of > my rc that loads the Intel modules under 2.6.x, maybe you'd find it > helpful: > > <snip> > modprobe ixp400 > cat /etc/IxNpeMicrocode.dat > /dev/ixNpe > modprobe ixp400_eth > > sumac -n 2 -m "RedBoot config" -r "npe_eth%d_esa" > route add -net 127.0.0.0 netmask 255.255.255.0 lo > </snip> > > now you can now do: > ifconfig -a > ifconfig eth0 192.168.1.1 > ping 192.168.1.100 > > Hope it help, > Assaf > > -----Original Message----- > [mailto:[EMAIL PROTECTED] On Behalf Of Knut Johansson > > Hi > > I have a odd problem with network on the IXDP425 with 2.6.x kernels, for > 2.4 everything works ok. It may be I have missed a config setting or > something obvious, but I'm stuck. I hope someone has a idea/tip. > > My board has one i82557/i82558 10/100 Ethernet port(using eepro100 > driver) as eth0. And one of the 425s npe port is connected to a regular > ethernet port, while the other is connected to a 4 port switch. > > The eepro100 driver pass self tests and the Intel modules loads ok. > Setting up the devices with ifconfig also gives no problems. Regardles > of this, they simply does not work. But I don't see any error messages. > Nothing works on the network, not even ping. > > Except ONE of the switch ports on the ixp0, this one works ok with every > network service. I thought all ports on the switch was identicall, but > the 3 others are as dead as the ixp1 and eth0 ports. > > Any ideas how to get them working? >
_______________________________________________ uClinux-dev mailing list [EMAIL PROTECTED] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [EMAIL PROTECTED] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
